LY-600L coating thickness gauge can non destructively measure the
thickness of non-magnetic coatings (e.g. aluminium, chrome, copper,
enamel, rubber, paint, etc.) on magnetic metel materials (e.g.
steel, iron, alloy, hard magnetic steel, etc.) and the thickness of
non-conductive coatings (e.g. enamel, rubber, paint, plastic, etc.)
on non-magnetic metal substrates (e.g. copper, aluminium, zinc,
tin, etc.)
1. Features
* Spring-guided probe with ultra-wear-resistant alloy tip ensures
consistent contact pressure and stable measurement accuracy even on
hard or rough surfaces, with a durability exceeding 500,000
measurements.
* High accuracy and stability, capable of measuring ultra-thin
coatings (1-5 μm).
* Supports hot-swappable interchange of multiple probe types.
* High speed: 0.3 seconds per measurement.
* Wide measurement range with high resolution.
* Light-contact measurement achieves reliable precision.
* Automatic substrate recognition(Fe/ NFe).
* Split-type design, facilitating measurements in narrow areas.
* Two display modes: Readings Only, Readings& Statistics.
* Statistical functions: Average (x̄), Max/Min, Standard Deviation
(σ), Count (N).
* Three calibration modes: Zero Calibration, One Point Calibration,
Five Point Calibration.
* HD color screen with auto-rotation for multi-angle viewing.
* Supports USB connection to PCs for data acquisition and automated
report generation, facilitating efficient corporate data
management.
* Large storage capacity: 16 groups, 100 data points per group
(total 1,600).
* Upper/lower limit alarms.
2. Technical parameters
* Display: 320×240 HD color LCD
* Measurement Range:0–1500 μm (Fe/NFe), Optional:0–3000 μm (Fe/NFe)
Resolution: 0.1 μm (0–99.9 μm), 1 μm (100–3000 μm)
* High Range: Fe: 0–5000 μm, 0–10000 μm
Resolution: 0.1 μm (0–99.9 μm) , 1 μm (100-999μm), 0.01 mm (1.00–9.99 mm), 0.1mm(10.0mm)
* Accuracy: 0–1500μm:±2%H +1μm, 1500–10000μm: ±3%H +1.5μm
* Minimum Substrate Thickness: 0.3 mm
* Minimum Curvature Radius: Please refer to the "Optional Probes" parameter table in the user
manual.
* Measurement Modes: Single/Continuous
* Units: μm/mil
* Power Supply: 2×1.5V AA batteries or USB
* Battery Life: 15 hours (continuous use)
* Operating Conditions: -10°C to 50°C, <80% RH
* Dimensions: 147×75×29 mm
* Weight: ~150 g (excluding batteries)
3.Package list
* Main Unit ×1
* Fe Calibration Block ×1
* NFe Calibration Block ×1
* AA Batteries ×2 (excluded for air transport)
* User Manual ×1
* Warranty Card ×1
* Carrying Case ×1
* USB Cable ×1
* Calibration Foils (50, 100, 250, 500, 1000 μm) ×1 set
Note: Note: For measurement ranges of 0–3000 μm and above, the instrument
is additionally equipped with 2000 μm or 4000 μm or 8000 μm
calibration foils.
