The LY-600V coating thickness gauge, our patented product, is
specifically designed for non-destructively measuring coating
thickness on circular workpieces with diameters up to 100mm,
capable of measuring both non-magnetic coatings (e.g., aluminum,
chromium, copper, enamel, rubber, paint, etc.) on magnetic
substrates (e.g., steel, iron, alloys, hard magnetic steel, etc.)
and non-conductive coatings (e.g., enamel, rubber, paint, plastic,
etc.) on non-magnetic metal substrates (e.g., copper, aluminum,
zinc, tin, etc.).
1. Features
* Spring-guided probe with ultra-wear-resistant alloy tip ensures
consistent contact pressure and stable measurement accuracy even on
hard or rough surfaces, with a durability exceeding 500,000
measurements.
* High accuracy and stability, capable of measuring ultra-thin
coatings (1-5 μm).
* High speed: 0.3 seconds per measurement.
* Wide measurement range with high resolution.
* Light-contact measurement achieves reliable precision.
* Automatic substrate recognition(Fe/ NFe).
* Split-type design, facilitating measurements in narrow areas.
* Dot-matrix backlit display, parallax-free, suitable for night use.
* Auto power-off function for energy saving.
2. Technical parameters
* Display: LCD dot-matrix display
* Measurement Range: 0–1500 μm (Fe/NFe), Optional:0–3000 μm (Fe/NFe)
* Resolution: 0.1 μm (0–99.9 μm), 1 μm (100–3000 μm)
* Accuracy: 0–1500μm:±2%H +1μm, 1500–3000μm: ±3%H +1.5μm
* Minimum Substrate Thickness: 0.3 mm
* Minimum Curvature Radius: F:凸 1.5mm ,N:凸 3mm
* Measurement Modes: Single/Continuous
* Units: μm/mil
* Power Supply: 2×1.5V AA batteries
* Operating Conditions: -10°C to 50°C, <80% RH
* Dimensions: 146×75×30 mm
* Weight: ~250 g (excluding batteries)
3.Package list
* Main Unit ×1
* Fe Calibration Block ×1
* NFe Calibration Block ×1
* AA Batteries ×2 (excluded for air transport)
* User Manual ×1
* Warranty Card ×1
* Carrying Case ×1
* Calibration Foils (50, 100, 250, 500, 1000 μm) ×1 set
Note: For the 0-3000 μm measurement range, the instrument is supplied
with an additional 2000 μm calibration Foil
