LY-600F5 coating thickness gauge can non destructively measure the
thickness of non-magnetic coatings (e.g. aluminium, chrome, copper,
enamel, rubber, paint, etc.)on magnetic metel materials (e.g.
steel, iron, alloy, hard magnetic steel, etc.)
1. Features
* Spring-guided probe with ultra-wear-resistant alloy tip ensures
consistent contact pressure and stable measurement accuracy even on
hard or rough surfaces, with a durability exceeding 500,000
measurements.
* High speed: 0.3 seconds per measurement.
* High accuracy and stability.
* Wide measurement range with high resolution.
* Light-contact measurement achieves reliable precision.
* Automatic substrate recognition.
* Split-type design, facilitating measurements in narrow areas.
* Dot-matrix backlit display, parallax-free, suitable for night use.
* Auto power-off function for energy saving.
2. Technical parameters
* Display: LCD dot-matrix display
* Measurement Range: 0–5000 μm (Fe)
* Resolution: 0.1 μm (0–99.9 μm), 1 μm (100–999 μm),
0.01mm(1.00-5.00mm)
* Accuracy: 0-1500μm:±2%H+1μm, 1500-5000μm:±3%H+1.5μm
* Minimum Substrate Thickness: 0.3 mm
* Minimum Curvature Radius: F:凸 1.5mm
* Measurement Modes: Single/Continuous
* Units: μm/mil
* Power Supply: 2×1.5V AA batteries
* Operating Conditions: -10°C to 50°C, <80% RH
* Dimensions: 146×75×30 mm
* Weight: ~250 g (excluding batteries)
3.Package list
* Main Unit ×1
* Fe Calibration Block ×1
* AA Batteries ×2 (excluded for air transport)
* User Manual ×1
* Warranty Card ×1
* Carrying Case ×1
* Calibration Foils (50, 100, 250, 500, 1000 , 2000, 4000μm) ×1 set
