90° Spiral Conical Gear Progressive Meshing For Reducing Impact
The set of Spiral Bevel Gears can be analyzed from dimensions such
as structure, working principle, performance, and applications.
Their design and characteristics are highly adapted to industrial
transmission scenarios (e.g., KF series bevel gear reducers):
I. Structural Features: Spiral Tooth Profile + Conical Base
1. Tooth Profile Design: The tooth line is spiral around the conical generatrix, forming a
curved tooth surface.
2. Geometric Relationship: The pitch cone vertices of the two gears coincid, and the shaft
angle is usually 90° (adapting to right-angle transmission).
3. Processing Marks: Parameters like tooth surface helix angle and pressure angle
determine meshing characteristics.
II. Transmission Principle: Progressive Meshing for Right-Angle
Power Conversion
1. Meshing Mode: The spiral tooth surfaces "progressively contact" during rotation
(gradually meshing from the tooth end to the full tooth, then
disengaging), rather than the "instantaneous line contact" of
straight teeth, significantly reducing impact.
2. Power Direction Change: Through the meshing of conical tooth profiles, the
horizontal/vertical rotation of the input shaft is converted into
the vertical/horizontal rotation of the output shaft (while
achieving speed reduction/increase using the tooth ratio).
III. Performance Advantages: Core Competitiveness Surpassing
Straight Teeth
| Comparison Dimension | Spiral Bevel Gears | Straight Bevel Gears |
|---|
| Stability | Progressive meshing enables smooth operation with minimal vibration
even at high speeds. | Instantaneous meshing causes significant impact and noise. |
| Load - Carrying Capacity | Tooth surfaces feature surface contact, increasing torque - bearing
capacity by 30%–50%. | Tooth surfaces have line contact, making them prone to fatigue
failure. |
| Noise Control | Smooth meshing reduces operating noise by 10–15 dB. | High meshing impact results in sharp noise. |
| Transmission Efficiency | Low sliding friction on tooth surfaces yields an efficiency of
95%–98%. | Efficiency is around 90%–93%, leading to higher energy consumption. |
IV. Application Scenarios: Covering from Industrial to Precision
Equipment
1. Industrial Reducers: Such as KF series bevel gear reducers, responsible for right-angle
direction change + speed reduction and torque increase, adapted to
heavy-load scenarios like machine tools, conveyor lines, and mining
machinery.
2. Automotive Field: Differentials (achieving wheel differential speed + right-angle
transmission), four-wheel drive transfer cases (distributing power
to front and rear axles).
3. High-End Equipment: Helicopter main reducers (high speed, high reliability), robot
joints (low backlash, high stability).
4. Precision Instruments: Medical devices, optical equipment (relying on low vibration and
high positioning accuracy).
V. Design and Processing: Technical Barriers Behind High Precision
1. Processing Difficulty: Requires specialized machine tools to mill spiral tooth profiles,
with tooth surface grinding accuracy reaching ±5μm level;
otherwise, meshing stability is affected.
2. Installation Requirements: The pitch cone vertices of the two gears must be strictly aligned,
and axial/radial clearances need precise adjustment (errors
exceeding 0.1mm will exacerbate wear and noise).
3. Materials and Heat Treatment: Alloy steels such as 20CrMnTi, 18CrNiMo7-6 are commonly used, with
tooth surfaces hardened to HRC58~62 through carburizing and
quenching, while heat treatment deformation must be controlled
(deformation exceeding 0.05mm results in scrapping).
VI. Adaptability to KF Reducers
▶Functional Matching: The 90° shaft angle perfectly fits the “right-angle transmission"
requirement of KF series.
▶Performance Compatibility: The high load capacity and low noise of spiral teeth directly meet
the industrial scenarios of reducers requiring "heavy load and
stable operation".
▶Flexible Speed Ratio: By adjusting the tooth ratio, it covers the speed ratio range of
i=3~50 for KF series.
In short, spiral bevel gears, with "spiral tooth profile + conical
base" as the core, achieve efficient and stable right-angle power
transmission through progressive meshing. They are "core
components" of industrial equipment such as KF series bevel gear
reducers, and their design and manufacturing level directly
determine the performance ceiling of transmission systems.
DINGSCO Precision Gear Solutions — Pioneering Force in Equipment Transmission
Core Advantages: Cutting-Edge Equipment × Digitalized Processes ×
Full-Cycle Services
As a leading precision gear manufacturer, DINGSCO specializes in
customized production of micro high-precision spiral bevel gears
and hypoid gears through our multiple CNC seven-axis five-linkage
spiral bevel gear grinding/milling machines and Gleason spiral
bevel cutter technology. With DIN 6 precision class (tooth profile
error ≤ ±5μm), 95%+ transmission efficiency, and ultra-high
reduction ratios, we deliver reliable transmission solutions for
robotics, motor drives, new energy vehicles, and more.
Why Choose DINGSCO?
✅ High Precision: Achieving DIN 6 grade accuracy, leading the industry in
controlling tooth profile errors.
✅ High Efficiency: With a single - stage reduction ratio of up to 300:1, and a
transmission efficiency of over 95%.
✅ Durability: 40% lower lifecycle cost, <0.5% failure rate.
✅ Fast response: The digital process can shorten the delivery cycle to 20 working
days.
Contact Us Soon for gear optimization proposals and 3D meshing
simulations!
