SINO Economy 2 Axis LED Digital Readout System DRO SDS2MS
One digital readout from the SDS2 series is the LED DRO SDS2MS.
That digital readout is an economical version of the SDS6 series.
Additionally, it uses the most recent 16-bit SCM technology and can
receive high-frequency A/B signals up to 5MHz.
Most two-axis display requirements, such as those for high
precision coordinate boring machines, floor boring machines,
grinding machines, lathes, milling machines, and so on, may be
satisfied by that.
The plastic case aims to reduce weight in order to save more money
on shipping.
Upgraded Functions:
- The function of the calculator:
To increase calculation accuracy, the SDS2 series may alter the
decimal digits to three, four, or five. - Non-linear error compensation: There can be no more than 40
sections in the system. Compensation for non-linear errors to
improve the positioning precision.
- The numbers of decimal digits can be chosen in inch mode:
4 / 5 decimal digits can be chosen in inch mode. 4 digits can
satisfy long scale requirement, and 5 digits can satisfy high
precisions display.
Specifications :
Supply Voltage range: AC 80V~260V; 50~60Hz, US Plug available
Power consumption: 15VA
Operating temperature: 0~45 degrees centigrade
Storage temperature: -30~70 degrees centigrade
Readout allowable input signal: TTL/RS422 square wave
Allowable input signal frequency: Less than 5MHz
Max resolution of digital display length: 0.5µm
Min resolution of digital display angle : 0.0001/pulse
Packaging List :
| 1 PC | 2 Axis digital readout SDS2MS |
| 1 PC | Transparent cover |
| 1 PC | Instruction Manual (English) |
| 1 PC | Cable |
Product image /photos:
The rack in the picture is optioned, not standard product.
