2-meter wide customizable cement sliding mode paving machine for
water channels
Product description
SMC-3200 cement concrete slipform paver is a slipform construction
equipment independently developed by our company for small and
medium-sized concrete structures. Compared with the traditional
prefabrication process and fixed mold cast-in-place process, the
sliding form process using this type of machine has the advantages
of fast construction speed, high efficiency and good quality.
The machine has strong engine power, full electronic control, full
hydraulic drive, two crawler drives, and is equipped with an
automatic steering and leveling control system. It can complete the
vibration compaction, paving, forming and other processes of cement
concrete structures at one time.
According to different construction conditions, the walking mode of
SMC-3200 cement concrete slipform paver can be divided into two
modes: two crawler drive and four-wheel driven walking or single
crawler drive and four-wheel driven walking. If the conditions of
the roadbed on both sides permit, two crawlers can be installed on
the front side of the paver to walk on the roadbed; Side embankment
walking.
SMC-3200 cement concrete slipform paving meets container
transportation conditions. When transporting, change the two
crawler belts on the front side of the paver to single crawler
belt, and move the installation position of the rear column inward.
Technical Parameters
| Engine Parameters |
| manufacturer | Weichai |
| model | WP3.2G |
| Calibration power | 36.8Kw/2500rpm |
| Displacement | 3.17L |
| Number of cylinders | 4 cylinders |
| cooling method | water cooling |
| Emission Standards | Stage 3(stage 4 optional) |
| Electrical System Parameters |
| power supply | 12V |
| UI | color display |
| operation control | integrated control |
| control bus | CAN |
| Three boxes volume |
| Fuel tank | 190L |
| Hydraulic tank | 200L |
| water tank | 600L |
| walking parameters |
| paving speed | 0-11.6m/min |
| Driving speed | 0-1.2km/h |
| Climbing ability (working state) | 20% |
| Track Steering Angle | 250(left),360(left) |
| Flatness | 3mm/3m |
| Vehicle height adjustment |
| Hydraulic height adjustment | 900mm |
| mechanical height adjustment | 230mm |
| Basic Paving Parameters |
| The maximum paving width of the ditch | 2100mm |
| The maximum paving depth of the ditch | 850mm |
| Pavement maximum paving width | 2000mm |
| Pavement Maximum Paving Thickness | 200mm |
| Maximum working capacity | 50m3/h |
| Total Weight | 6t |
| Overall Dimensions (Working/Transportation) |
| Total length | 4450mm/4450mm |
| Total width | 2720mm/(road 2430mm,container 1900mm) |
| Total height | 3400mm/(road 2200mm,container 2200mm) |
| Vibrator |
| Number of ports | 6 |
| vibrator form | Hydraulic Straight Vibrator |
| Adjustment method | Manual scaling |
Cases:
