Vertical Flammability Chamber for Hot Forging and Smelting of Brass
Aluminum and More
Application
For Gear, shaft, Pipe, Bearing, Pump fitting, steel plate, roller
etc. hardening
A. Heating (hot forging, hot fitting and smelting):
The purpose of hot forging is to forge workpieces with a certain
temperature (different material requirements)
With the help of a press, forging press or other equipment,
For example, hot extruded watch cases, watch flanges, handles, mold
accessories, kitchenware and cutlery,
Art works, standard parts, fasteners, mechanical parts, brass
locks, rivets, steel pins
And a pin.
2. Smelting is basically the use of high temperature to dissolve
metal into a liquid, mainly applicable to
Smelting iron, steel, copper, aluminum, zinc and other precious
metals
3. Resistance heating is 100% energy efficient because all incoming
electrical energy is converted to heat. However, most electricity
is generated by coal, natural gas or oil generators, which can only
convert about 30 percent of their fuel energy into electricity. Due
to the loss of power generation and transmission, heat from
electricity is often more expensive than heat generated by homes or
businesses using combustion equipment such as natural gas, propane,
and oil stoves.
B. Heat Treatment (surface quench):
It is mainly aims to change the rigidity of the metal materials
through the heat treatment to work pieces. Detail
applications are stated as follows:
1. heat treatment of gear and shaft 2. brazing of diamond tools 3.
brazing of electrical kettle bottom 4. tube heating for coating 5.
heating of stainless steel vessel for annealing.
It mainly aims to melt the solder by heating it to a certain
temperature for the purpose of connecting two types of
metals of the same material or different materials.
1. Welding of various hardware cutting tools, such as diamond tool,
abrasive tool, drilling tool, alloy saw blade,
hard alloy cutter, milling cutter, reamer, planning tool and solid
center bit.
2. Welding of various hardware mechanical gadget: Silver soldering
and brazing of metals of the same variety or
different varieties, such as hardware toilet and kitchen products,
refrigerating copper fitting, lamp decoration
fitting, precision mold fitting, hardware handle.
3. Compound pot bottom welding is mainly applicable to the braze
welding of circular, square as well as other
irregular plain pot bottom. It is also applicable to plain braze
welding of other metals.
D. Annealing (tempering and modulation):
1. Annealing of various stainless steel products, such as stainless
steel basin, annealed and extruded can, annealed
folded edge,annealed sink, stainless steel tube, tableware and cup.
2. Annealing of various other metal work pieces, such as golf ball
head, cue, brass lock, hardware copper fitting, kitchen
knife handle, blade, aluminum pan, aluminum pail.
Parameter
| item | value |
| place of Origin | China |
| Brand Name | YUYANG |
| Condition | New |
| Machine Type | Induction Heating Machine |
| Machinery TestReport | Provided |
| Marketing Type | New Product 2021 |
| Warranty of core components | 1 Year |
| Core Components | PLC, Motor |
| Warranty | 1 Year |
| Online support, Video technical support |
| Key Selling Points | Easy to Operate |
| After Warranty Service | Video technical support, Online support |
| Local Service Location | Malaysia, Saudi Arabia, Pakistan, India |
| Applicable Industries | Machinery Repair Shops, Manufacturing Plant, Other |
| Showroom Location | None |
| Rated Power output | 60kw |
| Work power | 340V-430V |
| Maximum input cur | 10-70A |
| Volume(mm 3) | 660 mmx290mmx410mm 740 mmx340mmx380mm |
| Max input current | 200-1200A |
| Gross weight | Host 54kg Extension 43kg |
| Power supply | Three phase 380v 50Hz |
| Time sting(atomatic time) | 1-99.02s |
| Cooling water | 0.08-0.16MPa 9L/min |
Operating Principle
Frequency conversion electromagnetic induction heating or induction
heating for short is a method for heating metal
materials by converting power frequency power supply into that of
specific range based on the principle of electromagnetic
induction. This type of heating technique is also applicable to packing industry (such as sealing
of aluminum foil used in medicine and food industry), semiconductor material . Basic components of induction heating system include induction coil, AC
power source and work pieces. Induction coil can be fabricated into different shapes as per different heated objects.
The coil is connected with the power source providing
alternating current for coil. 
Advantages of Induction Heating Equipment
1. Fast heating: the minimum rate of heating is less than 1 second (rate of
heating is available for adjustment and control).
2. Wide coverage of heating: it can be used to heat various metal parts (replace removable
induction coil as per different
perating switches).
3. Easy installation: it can be used once it is connected with power source, induction
coil as well as water supply pipe and
rising pipe; it is small in size and light in weight.
4. Easy operation: you can learn to operate it within several minutes.
5. Fast start-up: it can be started to perform heating operation on condition that
water and power supply is available.
6. Low power consumption: As compared with conventional vacuum tube high frequency
equipments, it can save the power
by approximately 70%. The smaller the size of the work piece is,
the lower power consumption
would be.
7. High effectiveness: it has such features as uniform heating (it is applicable to
adjust the spacing of the induction coil to
ensure the appropriate temperature as required by each part of work
piece), fast warming and limited
oxic horizon, and can guard against any waste after annealing.
8. Comprehensive protection: it has such functions as overpressure, over-current, overheat and
water shortage alarm indications
as well as automatic control and protection.
9. Controllable temperature: it is applicable to control the temperature for heating work
pieces as per the preset heating time,
and thereby control the heating temperature at a certain technical
point.
10. Comprehensive full load design: it can work continuously for 24 hours.
11. Small size and light weight: it has a weight of only several dozens of kilograms, of which,
the limited floor space can effectively
save the workshop space.
12. Elimination of high voltage: it requires no step-up transformer which may produce
approximately ten thousand voltage, and
thus can ensure the maximum safety.
