LPG CNG Auto Part Solenoid Coil 12VDC 12 Volt DC12V 48W

LPG CNG Auto Part Solenoid Coil 12VDC 12 Volt DC12V 48W

1. Product Name: LPG CNG Solenoid Coil For Injector Rail
2. Supply Voltages: 12V DC, Resistance: 2 Ohm, 3 Ohm, 4 Ohm
3. Solenoid Coil Inuslation Class is H, F
4. Solenoid Coil Portdction Class is IP65, IP67
5. Connector Type: DEUTSCH.
6. Brando supply all kinds of solenoid coils to repair many brand injector rail, such like BRC (IN03 MY09R), LOVATO, OMVL (REG), AEB (INJ R2S R3S R4S), VALTEK (Type 30), ATIKER, RAIL (IG7 Dakota) and so on.

The dual-fuel vehicle is equipped with a LPG supply system while retaining the original vehicle fuel system. It can be freely converted between gasoline and LPG as needed during use. When a car burns LPG and burns gasoline, the driver only needs to operate the accelerator pedal to change the working condition of the engine and adapt to the driving performance requirements of the car.

Technical parameter of BB11014014 solenoid coils:

Main dimenison of BB11014014 solenoid coil:



Other electromagnetic coils for your reference:


Dual fuel car LPG system composition and working principle
1. The main composition and working principle of the dual fuel car LPG system
The system consists of a gas storage tank, an evaporation regulator, a gasoline solenoid valve, an LPG solenoid valve, a power regulating valve, a venturi mixer, a fuel transfer switch, and a control circuit.
When the fuel transfer switch is turned to the LPG position, the gasoline solenoid valve is de-energized (cutting off the gasoline supply) and the LPG solenoid valve is energized. The LPG liquid comes out of the gas storage tank, passes through the LPG solenoid valve to the evaporation regulator, and is depressurized and vaporized to become a gas close to atmospheric pressure. The LPG gas flows through the power regulating valve to the venturi mixer, is thoroughly mixed with the air in the venturi mixer, and supplies a certain amount of LPG gas to the carburetor throat (acting only as a channel) according to the operating conditions of the engine.
2. Gas storage tank
The gas storage tank is installed in the luggage compartment at the rear of the vehicle. Its function is to store the LPG. The integrated valve is installed on it to ensure the safe use of the gas storage tank and the whole system.
Solenoid Coil Production Line:






Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on