Dongfeng DFAC 12m3 Garbage Transport Transfer Collection
Compression Compactor Waste Truck
Dongfeng DFAC 12m³ Garbage Transport Transfer Collection
Compression Compactor Waste Truck is a specialized municipal
sanitation vehicle built on a Dongfeng chassis, designed for
efficient collection, compression, and transport of municipal solid
waste.
The garbage compactor truck usually called compressed waste truck,
compression garbage truck, waste compactor truck, compactor garbage
truck, etc. The compressed garbage truck compresses the garbage
through the hydraulic mechanism. The hydraulic mechanism operates
the movable plate or shovel to scoop the garbage out from the
filler into the compartment and compresses it against a moving
wall. The garbage loaded by the compressed garbage truck is 2.5
times that of the ordinary garbage truck.
Dongfeng DFAC 12m3 Garbage Transport Transfer Collection
Compression Compactor Waste Truck Technical Data:
| Component/Feature | Parameter | Details/Range |
|---|
| Effective Container Volume | 12m3 (Cubic Meters) | Effective compression volume. |
| Chassis Model | Dongfeng Series (4*2) | Examples: EQ1168KJ, Dongfeng Tianjin, Dongfeng Kingrun. |
| Drive Type | 4*2 | Two-axle, rear-wheel drive. |
| Engine Brand/Model | Dongfeng Cummins | Common models: B170 33, ISB180 50, B190 33. |
| Engine Power | 125kW to 140kW (170HP to 190HP) | Varies by specific engine model. |
| Displacement | 5.9L (approx. 5900ml) |
| Emission Standard | Euro 3 to Euro 5 (or higher) | Depends on the year of manufacture/market. |
| Transmission | Manual | Typically 8 forward gears and 1 reverse. |
| Overall Dimensions (L x W x H) | Approx. 7,350*2,500*3,050mm | Varies based on cab type and superstructure design. |
| Wheelbase | Approx. 4,500mm |
| Gross Vehicle Weight (GVW) | 16,000kg to 18,000kg | Max total allowable weight. |
| Rated Load/Payload | 5,070kg to 10,000kg | Varies based on curb weight and local regulations. |
| Max Speed | 90km/h |
| Tire Specification | 10.00R20 or 10.00-20 |
| Brake System | Full Air Brake |
| Body Material | High-strength carbon steel (e.g., Q345/Q355) |
| Body Plate Thickness (Side/Bottom) | Side: 4mm / Bottom: 5mm |
| Compression Method | Two-way compression, rear-end loading | Hydraulic slide plate and push plate. |
| Compaction Ratio | ≥1:2.5 | Can achieve a density of 600kg/m3 to 800kg/m3. |
| Loading Hopper Volume | 0.8m3 to 2.0m3 | Volume of the feeder at the rear. |
| Hydraulic System Working Pressure | 16MPa to 18MPa | Maximum pressure of the compactor hydraulics. |
| Loading Cycle Time | ≤25s to ≤40s | Time required for one full cycle of trash collection/compaction. |
| Unloading/Discharge Time | ≤40s to ≤60s | Time required to horizontally push out the garbage. |
| Sewage Tank Capacity | 200L to 500L | Collects liquid run-off during compression. |
| Control System | PLC Automatic / Manual | Electric control (PLC one-key operation) and backup manual lever
control. |
| Rear Loading Device | Bin Lifting Mechanism | Configurable for 120L, 240L, 660L, 1100L bins, or dustpan-type
mechanisms. |
| Model | CLW5182ZYSD | Product Name | Compactor garbage truck |
|---|
| Product Brand | CLW Brand | Overall Size | 9040x2550x3200mm |
|---|
| Axes | 2 | Wheelbase | 4700mm |
|---|
| G.Weight | 18000kgs | Curb Weight | 10500kgs |
|---|
| Gearbox | 6-speed | Tyre size | 10.00R20 18PR |
|---|
| Engine | 210HP | Power steering | LHD or RHD |
|---|
| Upper structure parameters |
|---|
| Capacity | 12 m3 |
| Structure | body, compartment, sub frame,filler, compressor, hydraulic and
electric system, pipeline, sewage tank,pressure gauge,etc. |
| body shape | Arc-shaped |
| Material | Carbon steel Q235R |
| Sidewall | 4mm thickness |
| Bottom | 5mm thickness |
| Sewage tank | 4mm carbon steel, 304 stainless steel is optional |
| Pressure Value | 16Mpa |
| Pressing mode | Automatic pressing, operated by hydraulic system |
| Compression ratio | ≥2.5 |
| Loading cycling time | ≤25 second |
| Unloading garbage time | ≤15 second |
The above mentioned figures are approximate.
- Optional equipments are included in these photographs
- Specifications and dimensions are subject to change without notice.
- Material : Anti-corrosion Steel
- Material : Anti-corrosion Steel or High-tensile Steel
- Material : High-tensile Steel
Dongfeng DFAC 12m3 Garbage Compression Truck 5cbm-10cbm Compactor
Waste Truck Application:
Compression Mechanism: Utilizes a hydraulic system with a push
plate and filler/hopper mechanism for two-way compression, which
crushes and packs the garbage inside the sealed body.
Compression Ratio: Typically ranges from 1:2.5 or higher (can vary
based on garbage type and pressure).
Loading/Unloading: Rear-end loader type.
Garbage Bin Flip Device: Can be equipped with a mechanism to lift
and dump various standard waste bins (e.g., 120L, 240L, 660L, 1100L
plastic or iron bins).
Unloading: Hydraulic push-plate system for complete discharge of
compressed waste.
Control System: Features electro-hydraulic integration technology,
with control options:
- Automatic (often PLC one-key operation).
- Manual (lever control).
- In-cab control box.
Anti-Pollution: Designed as a fully sealed type to prevent leakage.
It is equipped with a sewage tank to collect dirty water generated
during the compression process, minimizing secondary pollution.
The garbage compactor truck (garbage compacting truck) is used to
collect, transport and clearing up wastes, advoiding the secondary
pollution. Features of the garbage dump truck, one kind of
new environmental truck, are easy, effective, and enviromental.
Garbage compactor truck is widely used in sanitation organization,
municipal administration, mining area, property area, residential
area, and many other places where garbage is centralized.
About Chengli Special Automobile Co., Ltd
Core Entity: Chengli Special Automobile Co., Ltd. is the core
enterprise of the Chengli Group (CLW Group), a diversified
automobile manufacturing group.
Designation: It is a large-scale vehicle manufacturing enterprise
officially designated and authorized by the Ministry of Industry
and Information Technology of China to produce various
special-purpose vehicles.
Rankings: Chengli Group is recognized as a "China Top 500 Private
Enterprise" and a "National High-tech Enterprise."
Trademark: The company's registered and well-known trademark is
"CHENGLIWEI" (or "CLW").
Scale: The group has total assets of billions of RMB, occupies a
large industrial park (Chengli Automobile Industry Park), and
employs over 10,000 staff, including thousands of technical workers
and R&D personnel.
Established in Sep. 2004,Chengli Special Automobile Co., Ltd is an
important branch of CLW group with registered capital 100,000,000
RMB(14
millions US Dollars) and total capital 6,000,000,000(840 millions
US Dollars).
Chengli Special Automobile Co., Ltd Overseas Market
Global Reach and Export Volume
Total Countries: Chengli products are exported to more than 80
overseas countries and regions globally.
Volume: The company has a substantial annual export business, with
one report citing a foreign trade export value of $30 million USD
and another mentioning exports to over 50 countries.
Strategic Partnerships: They frequently enter into strategic
cooperation agreements with major Chinese truck chassis
manufacturers (like DONGFENG, SHACMAN, FOTON, SINOTRUK, ISUZU, JAC)
to jointly promote their combined products in the international
market, often under the banner of the "Belt and Road Initiative."
Trucks from Chengli Special Automobile Co., Ltd have been sold to
more than 29 provinces in China and more than 80 overseas countries
and regions in
Asia, Africa, South America, middle east and so on, such as Russia,
Mongolia, Philippines, Vietnam, Cambodia, Myanmar, Laos,
Kazakhstan, Uzbekistan,
Kyrghzstan, Tanzania, Zambia, Nigeria, Australia, Chile, Bolivia,
Ethiopia, Sudan, Malaysia, Congo, El Salvador, Iraq, New Zealand,
Chile, Bolivia, Argentina and also truck body for client
drawing
