0.8 W/M·K Silicone Potting Compound 1:1 Two-Component Addition Type
Silicone Potting Rubber For Electronic Components High And Low
Temperature Resistance Silicone Potting Material
PRODUCT DESCRIPTION
HN-8806, two-component addition type silicone potting rubber which can be cured into high-performance elastomer by room
temperature or heating.
This potting silicone rubber has excellent electrical insulation, high moisture resistance, and
a wide temperature range of -50°C to 250°C.
Low-viscosity potting compound that Will cure in deep sections. Low
shrinkage rate after curing, will not emit heat and by-products, no corrosion for filling and sealing
components.
| Test Items | Test Standard | Units | Product test results |
| Part A | Part B |
| Before curing | 1 | Appearance | --- | --- | Grey, fluid | White, fluid |
| 2 | Viscosity | GB/T10247-2008 | 25ºC, mPa·S | 4500~5000 | 4500~5000 |
| 3 | Density | GB/T 13354-92 | 25ºC, g/cm³ | 1.50±0.05 | 1.50±0.05 |
| 4 | Mixing Ratio (A : B) | 1:01 | Weight ratio | 100 | 100 |
| Volume ratio | 100 | 100 |
| 5 | Operating time | Measured | hr | 0.3-0.4 | |
| 6 | Curing condition | Measured | hr | 4^12 (25ºC,initial cure) |
| 0.20 (80ºC) |
After
Curing | 7 | Appearance | --- | --- | Grey elastomer |
| 8 | Hardness | GB/T 531.1-2008 | Shore A | 50±5 |
| 9 | Thermal conductivity | GB/T10297-1998 | w/m·k | ≥0.76 |
| 10 | Expansivity | GB/T20673-2006 | μm/(m,ºC) | 210 |
| 11 | Moisture Absorption | GB/T 8810-2005 | 24h,25ºC, % | 0.01~0.02 |
| 12 | Volume resistivity | GB/T 1692-92 | (DC500V),Ω · cm | 1.0×10¹⁵ |
| 13 | Dielectric intensity | GB/T 1693-2007 | Kv/mm(25ºC) | 18^25 |
| 14 | Temperature Resistance | Measured | ºC | -50~+250°c |
Product application:
1) Application in the power industry
It is widely used in insulation and moisture-proof sealing,
environmental protection and corrosion protection, encapsulation
and bonding of cable accessories.
2) Application in the electronics and radio industry
Room temperature curing silicone sealants are widely used in
encapsulation, infusion, bonding, impregnation and coating in this
field.
3) Application in the automotive electronics field
Silicone potting glue is used in various control modules to perform
overall and general potting of components to achieve the basic
requirements of moisture-proof, anti-fouling and anti-corrosion.
4) Application in the power supply industry
Due to the unique properties of silicone materials, excellent
properties such as moisture-proof, electrical insulation, high and
low temperature resistance, and chemical stability
PACKING
* Packing *
10KG / Set (A, 5kg + B, 5kg)
20KG / Set (A, 10kg + B, 10kg)
50KG / Set (A, 25kg + B, 25kg)
- Storage and transportation:good
This product is a non-toxic non-dangerous goods, according to the
general chemical handling, stored in a cool & dry place (room
temperature).
- Shelf Life: 6 months, overdue please reinspect; If it meets the
standard, it can still be used.
