Induction Heating MachineFurnace Electric Induction Heating Furnace
for Forging
Description
Induction heating equipment is a kind of three-phase alternating
current (ac) power frequency, after rectification into direct
current,generate high density magnetic field lines in the induction
coil, induction coil, and cutting in cheng fang of metal materials,
produce a lot of eddy current in the metal materials. In Shanghai's
feeling electric technology put a metal cylinder has alternating
medium frequency current in induction coil, metal cylinder has no
direct contact with induction coil, electric coil temperature is
very low, but the surfaces are heated to redness, and even melt,
and the redness and melting speed as long as adjust the strength of
the size and current frequency can be achieved. If the cylinder is
placed in the center of the coil, the temperature around the
cylinder is the same, and the heating and melting of the cylinder
does not produce harmful gases or strong light to pollute the
environment.
This product has acquired the relevant product
qualification(s)/license(s) of certain applicable
country/countries.
Features
1. IGBT inversion technology based LC series circuit .
2. Phase locking looping technology and soft switch ensure good
reliability and realize power and frequency tracking automatically.
3. Diode rectifier cause high power factor more than 0.95
4. Power can be instantly turned on or shut off with working in
100% load
5. Perfect protective circuit and cooling system designed.
6. Low energy consumption: converts up to 97.50% above of the
expended energy into useful heat.
Parameters
Max Fluctuating Power | 70.01KW |
Fluctuating Frequency | 30-100KHZ |
Max Input Current | 105.01A |
Input Voltage | (3Phase), 380V, 50HZ-60HZ |
The Flow Rate of Cooling Water | 0.2Mpa, 7L/Min |
Continues Loading Rate | 85.01% |
Application
1. Induction heating machine for various hardware and tools heating
such as plier, wrench, hammer, ax,screwing tools and shear .
2. Heat treatment for various automobile and motorcycle fittings,
such as crankshaft,connecting rod, piston pin,chain wheel, aluminum
wheel, valve, rock arm shaft,semi drive shaft, small shaft and
fork.
3. Heat treatment for various electric tools, such as gear and
axes.
4. Heat treatment for machine tools,such as lathe deck and guide
rail.
5. Hardening for various hardware metal parts and machined parts,
such as shaft,gear chain wheel, cam,chuck and clamp etc.
6. Heating for hardware molds, such as small-size mold, mold
accessory and inner hole of mold.
7. Annealing of various stainless steel products, such as stainless
steel basin,annealed and extruded can, annealed folded edge,
annealed sink, stainless steel tube, tableware and cup.
How Does Induction Heating Work?
When a magnetic field changes near a metal or other conductive
object, a flow of current (known as an eddy current) will be
induced in the material and will generate heat. The heat generated
is proportional to the current squared multiplied by the resistance
of the material. The effects of induction are used in transformers
for converting voltages in all sorts of appliances. Most
transformers have a metallic core and will therefore have eddy
currents induced into them when in use. Transformer designers use
different techniques to prevent this as the heating is just wasted
energy. In this project we will directly make use of this heating
effect and try to maximise the heating effect produced by the eddy
currents.
If we apply a continuously changing current to a coil of wire, we
will have a continuously changing magnetic field within it. At
higher frequencies the induction effect is quite strong and will
tend to concentrate on the surface of the material being heated due
to the skin effect.
FAQ
1. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
2. What can you buy from us?
Fire Testing Equipment, Environmental Test Chamber, Textile Testing
Equipment, Toys Testing Equipment, Wire and Cable Test Machine
3. Why should you buy from us not from other suppliers?
We are a high-tech enterprise which is specialized in developing
and manufacturing Fire Testing Equipment, Building Material Fire
Tester, Wire and Cable Fire Tester, Environmental Test Chamber,
Textile Testing Equipment, Toys Testing Equipment and etc.
DONGGUAN YUYANG INSTRUMENT CO.,LTD is Located in Wanjiang District
(Dongguan City, Guangdong Province,China),a famous historical town
with prosperous industry and convenient transportation.
We are a high-tech enterprise which is specialized in developing
and manufacturing Fire Testing Equipment, Building Material Fire
Tester, Wire and Cable Fire Tester, Environmental Test Chamber,
Textile Testing Equipment, Toys Testing Equipment and etc.
Decades of research and development strengthen the leading edge of
YUYANG in this field, and established as an crucial role in R&D
on high quality and high-cost performance of testing equipment.
YUYANG's testing equipment are widely used in various field:
scientific institutions, colleges, inspection institutions, auto
parts, electronics, electricals, lithium battery, LED,
photoelectricity, mobile, plastic and rubber, display,
telecommunication, chemical industry, aerospace, building material
and product, wire and cable, toys, furniture, textile and fabrix,
etc. All YUYANG testing equipment are designed according to
international test standards, such as ISO, ASTM, DIN, EN, GB, BS,
JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.
DONGGUAN YUYANG INSTRUMENT CO.,LTD looks forward to cooperating
with customer all over the world.
If you are interested in any of our products or would like to
discuss a custom order. Please feel free to contact us. We are
looking forward to forming succesful business with new clients
around the world in the near future.
