Total 6420 products for cold mold Manufacture & Suppliers

• Transparent Clamshell Phone Back Cover (1*1) / Three-plates mold / Cold runner No.21872

  

  ...Mold size Part size Length Width Height Length Width Height 350 350 331 53.62 8.09 101.85 ☆ [Mold base P/N]: - FCI3035 609 ☆ [Part weight]: - 8.3g ☆ [Mold weight]: - 254kg ☆ [IMM Tonnage]: - 110T ☆ [Standard...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• Transparent battery cover (1*1) / Cold runner / Sub gate / No.21776

  

  ... part has minimized gate marks and smooth surface w/o burrs, LKM standard; it is a three-plate mold with 17 lifters, and fit 110T machine. The part weight is 15g and the part size is 161.27 X75.80 X7.30mm Ca...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• OEM / ODM ：Consumer Electronics Molds / Earphone left front shell (1*4) No.24205

  

  ...mold base Cavity angled slide Mold Size Length 550 Fit 100T machine Width 600 Height 551 Net weight 856kg Gate Cashew gate (the hot runner turns to cold runner) Injection/runner type Hot runner Open hot runn...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• Transparent Clamshell Phone Front Cover (1*1) / Three-plates mold / Cold Runner No.21871

  

  ...side gate * 6 [Type] [Lifter] * Three-plates mold structure * 10 [Injection/runner type] * Cold runner [Surface finish] ◇ Make the mold obtain a lower roughness, and the molded parts have smoother surface - ...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• OEM / ODM ： Cold Runner Injection Molding & Glasses Camera Housing+Bracket (1+1) No.23055

  

  Glasses Camera Housing+Bracket (1+1) No.23055 [L] 280mm | [W] 270mm | [H] 296mm [Mold base] Standard mold base FCI2327 608080 [Standard]: LKM Tool life up to 500k shots [Net weight]: 132 kg [IMM tonnage]: 140T ...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• OEM / ODM ： Cold Runner Injection Molding & Left + Right Eye Shell (1+1) No.23056

  

  Left + Right Eye Shell (1+1) No.23056 ��� Custom mold base ED3035 1 set A70-B100-C100 [Size]: 350x400x351 [Gate]: sub gate [Type]: Two-plates mold [Standard]: LKM [Mold net weight]: 277kg [IMM Tonnage]: 110T [Mol...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• OEM / ODM ： Cold Runner Injection Molding & Smart Watch Base Lower Housing (1*4) No.23305

  

  Smart Watch Base Lower Housing (1*4) No.23305 ��� Mold base P/N --- GCI3045 10011090 ��� Size - 350x450x391 ��� Standard - LKM ��� Type - Three-plates mold (more automatic) Slide 2 Lifter 5 ��� Tool life -500K shots ��� Mo...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• OEM / ODM：Custom consumer electronics molds / Smartwatch Front Housing Trim No.22400

  

  ...Mold base Standard (FCI2530.609080) 175kg ★ Fit 80T machine The mold is designed with a tab gate, the pin point gate turns to the side gate; more suitable for the part molding and quality control; the mold i...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• OEM / ODM ： Cold Runner Injection Molding & Scan Pen Inner Shell (1*2) No.24002

  

  Scan Pen Inner Shell (1*2) No.24002 Size:LxWxH Net weight 400 X 450 X 391 449kg Standard mold base FCI3545.A=70 B=120 C=90 IMM Tonnage 140T Gate: Side gate To meet customers' cost-effective requirement, Chitwin...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• VR Rear Shell Ring (1*2) / Cold runner /Three-plates mold No.22731

  

  ... turns to the side gate This is a three-plates mold, which requires no post-processing and can realize auto demolding Mold weight 166kg Tool life 500k shots Part material PC+ABS Part weight 1.5g Part size 49...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• Transparent VR Rear Shell Ring (1*2) / Cold runner /Three-plates mold No.22731

  

  ..., the pin point gate turns to the side gate. It is flexible in position, and has uniform feeding [Mold weight]: 166kg [Tool life]: 500k shots [Part material]: PC+ABS [Part weight]: 1.5g [Part size]: 49.16 X4...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• Transparent POA Rear Pad (1*1) / Cold runner / Two-plates mold No.22730

  

  ... life 500k shots Surface finish A surface EDM to VDI27# Standard LKM Steel of cavity and core Harden (1*1/S136) Mold features: 1 slide, no particles on the surface, mold good fitted; the runner can be regrou...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• Middle frame (1*1)/ Cold runner / Three-plates mold No.22676

  

  ...weight 5.6g Each cavity has 2 core slides, 1 in-core slide, 8 lifters; the part material is PC+10%GF; mold surface polished; harden the cavity and core with 1*1/S136 to improve anti-wearing and anti-corrosio...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• Middle frame (1*1) / Cold runner / Three-plates mold No.22448

  

  ...mold was developed by Chitwing (designed and manufactured). It is designed with a side gate and a custom mold base; the pin point gate turns to the side gate. The tool life is up to 50 K shots. Mold good fit...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• Smartwatch Middle Frame Bracket (1*2) / Cold runner / Three-plates mold No.22401

  

  ...# Mold base Standard Part material Type Three-plates mold PC Injection/runner type Steel of cavity and core Cold runner Harden (1*2/S136) The mold was developed by Chitwing (designed and manufactured), inser...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• Transparent Front Housing/ Cold runner / Three-plates mold No.22398

  

  ...mold Mold net weight: 350 kg Mold size: 350 X 400 X 416mm Part net weight: 3.5g Part size: 41.3 * 56.24 * 10.6mm IMM tonnage: 180T Standard mold base DAI3040.60100100, harden the cavity and core, the pin poi...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• Transparent Smartwatch Back Housing / Cold runner / Three-plates mold No.22399

  

  ...Guangdong, China Type Three-plates mold Injection/runner type Cold runner Part material PC+20GF The mold is designed with a sub gate (the pin point gate turns to the side gate), custom mold base, LKM standar...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• Transparent Smartwatch Middle Frame Bracket (1*2) / Cold runner / Three-plates mold No.22401

  

  ...Cold runner Type: three-plates mold Part material: PC The large surface EDM with Charmilles VDI24#, and harden the cavity and core with 1*2/S136, so that the mold has higher toughness and anti-wearing perfor...

  Dongguan Chitwing Technologies Co., Ltd

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• Precise Plastic Injection Mould Maker Hot Runner / Cold Runner 300000 Shots

  

  ...Mold Stationery Set Customized Moulding Plastic Injection Mold Information: Mold information Plastic Injection Mold Product Material ABS,PP,PC,PA,PMMA,PS,POM and etc. Mold base FUTABA,LKM,HASCO,DME you can c...

  JinJiang LiQi Mould Co., Ltd

  Fujian,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Electroplating Custom Injection Mold Word Standard Base For Protective

  

  Mold For Protective Custom Injection Mold Cold Mould Base Word Standard 1.Name: Mold For Protective Custom Injection Mold Cold Mould Base Word Standard 2.Material : Aluminum,Aluminum Alloy,Stainless Steel,Coppe...

  JinJiang LiQi Mould Co., Ltd

  Fujian,China

  Verified Supplier

  Add to cart

  Contact Supplier