| Sign In | Join Free | My burrillandco.com | 
              
  | 
      
                    ... Standard GB/T8627-2007 "Testing Method for Smoke Density of Burning or Decomposing Building Materials" and is applicable to the static burning of building materials and their products and other ma...
                    .... It is used to prepare the dumbbell Test Piece. Cable Testing Equipment The IEC 60811 series specifies the test methods to be used for testing rubber, insulation or coating material, non-metallic materials ...
                    ... density of asphalt mixture, for asphalt mixture mix design, road condition survey or pavement construction quality management to calculate void ......
                    ...measurement of smoke from burning materials and measures specific optical density under flaming and non-flaming conditions. It is also used for the extraction of toxic gas. Structure of Chamber 1, The NBS Sm...
                    ASTM D1298 Density / Specific Gravity Testing Equipment With Hydrometer Method Introduction This density meter is suitable to determine density of easy flowing liquid,and if working with suitable constant bath,...
                    ... Method Plastic Combustion Performance Testing Equipment Applicable standard: GB/T 2407-2008 Plastics combustion performance test methods. Main application: It is suitable for the determination of plastic bu...
                    ... Method Plastic Combustion Performance Testing Equipment Applicable standard: GB/T 2407-2008 Plastics combustion performance test methods. Main application: It is suitable for the determination of plastic bu...
                    ... method specified in GB/T260. It is also suitable to determine the water content of lubricating grease according to the test method specified in GB/T 512 Test Method for Water Content of Lubricating Grease. ...
                    ...Test Apparatus Application: CBR Value Test Apparatus is used in situ to test CBR value of the materials of every soil bases. Standard: GB/T 50123-2019 Standard for geotechnical testing method JTG E40-2007 Te...
                    ... roof wind resistance test, physical properties of metal roof. [Applicable standards] GB/T 31543 "Wind resistance test method for single-layer roll roofing systems", JGJ 255 "Technical specifi...
                    ... and other hanging fabrics according to test method NFPA 701#1, and it is suitable for single-layer or multi-layer fabrics, but not suitable for fabrics with density larger than 700g/m2 (21oz/yd2). Specifica...
                    ... propagation rate of exposed surfaces such as walls and ceilings (including solid plastics), at the same time measure smoke density. This test method applies to the exposed surface which includes ceiling or ...
                    ...Testing Equipment For Low Temperature Bending Test Standard:IEC60811-1-4 clause 8.1 and 8.2, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for gen...
                    ...Methods 2 Textiles and Films Flame Propagation Testing Equipment Application: It is used to assess the propagation of flame beyond the area exposed the ignition source. It is applicable to vinyl-coated fabri...
                    ...Methods 2 Textiles and Films Flame Propagation Testing Equipment Application: It is used to assess the propagation of flame beyond the area exposed the ignition source. It is applicable to vinyl-coated fabri...
                    ...Testing Smoke Density Chamber For Plastic Material Standard ISO5659-2 Smoke Density Apparatus is used for measuring & observing the relative amount (Density) of smoke produced by the burning Smoke Density Ap...
                    ... Solid Density Testing Machine New Material Research Purity Tester Solid Density Tester advantages: No manual calculation is required, can quickly measure the specific gravity of particles and block products...
                    ... method and vertical method", which fully meets the technical requirements of national standard GB/T2408. The test can be carried out in two ways of plastic horizontal burning and vertical burning in th...
                    ... characteristics of vehicle interior and inflammable cable. Measure the optical density of smoke when a certain thick specimen is exposed to a heat source of 50KW/m2. Standards: ISO 5659-2 Plastic smoke gene...
                    ... since its inception in the 1980s. SDB NBS Smoke Optical Density Testing Equipment is the most widely accepted apparatus for the measurement of smoke from burning materials and measures specific optical dens...