| Sign In | Join Free | My burrillandco.com |
|
... direct contact water pressure: 0.01Mpa, water flow: 1.9L/min, water temperature: ordinary temperature, test time: 10min R2 Auto parts against rain or spray water indirect contact water pressure: 0.03Mpa, wa...
...good homogenizing 1.Technical Specifications 【1】Technical specifications of 90 ℃ pvc compound Property Test Method Unite Typical Value Test Result Density ASTM D 792 Gm/cm² (±0.03) 1.5 1.524 Hardness A ASTM ...
... method is: fix one end of the earphone on the torsion clamp and fix headband on the support frame, then set test angle and rotating speed. After certain test cycles (can be set from 0-999999), take down the...
...Test Product Packaging Inclined Impact Testing Machine Model:ID6500 Application of equipment: It is suitable for product packaging boxes to simulate the slope impact test caused by the package tilting and sl...
...Test Packaging Incline Impact Testing Machine Model:ID6001 Application of equipment: It is suitable for product packaging boxes to simulate the slope impact test caused by the package tilting and sliding dur...
...Testing Performance Vehicle Test Chamber Applied Standards QC/T476-2007 “Rain Proof Performance Limit and Test Method for Bus”: Water emerges from gaps, leaves or runs continuously down the interior surface ...
... the box body is in the open fire, Smoke density test chamber can measure the smoke density. This instrument is suitable for E ASTM 662, BS6401, ISO5659, NES 711, NEPA258 and other standards. This test is mo...
...Test Equipment Low-Temperature Test Chamber for Wire and cable Standard: IEC60811-1-4 ‘common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general a...
... hazard testing – Part 11-3: Test flames – 500 W flames – Apparatus and confirmational test Methods’, IEC60695-11-4 ‘Fire hazard testing – Part 11-4: Test flames – 50 W flames – Apparatus and confirmational ...
...digital display density measuring instrument, for raw materials in the field of rubber and plastic particles and density measurement application is extremely widespread, 0.001 g/cm3 precision, using water as...
...sources-Part 3: Fluorescent UV lamps” IEC60068-2-5 “Environmental testing. Part 2-5: Testing. Test sa: guide to ground simulated solar radiation and solar radiation tests. IDT” GBT2423.24 - 2013 Environmenta...
...Testing Equipment 100 CN Application Automatic Wrap Reel is an ideal equipment to produce Skeins (lea/hank) of yarn for checking the yarn count and for lea strength testing. Supplied with 1 meter or 54 Inche...
...Test Chamber Environment Simulate Battery Testing Lab 1. Application: This equipment mainly used for battery high low temperature test,temperature change,humidity etc. Environment simulate reliability test. ...
...Testing Machine For Concrete , Hardness Testing Machine Model: RS-8000P Application: This tester is suitable for the compression testing, the hardness testing and the fatigue testing of polyfoam, sponge of s...
...Test Chamber, Large Three-integrated Test Chamber Model: RS-1000-DA Purpose: This equipment applies to environmental simulation reliability tests such as high and low temperature constant and gradual, abrupt...
...Test Machine For Packaging Model ID6001 PDF Specifications :Packaging Incline Impact Testing Machine Specifica... Equipment use: Impact Testing Machine is It is suitable for product packaging boxes to simula...
...Testing Machine Model Number:ID6001 Application of equipment: It is suitable for product packaging boxes to simulate the slope impact test caused by the package tilting and sliding during transportation or d...
...Test Equipment from -40℃ to +120℃ 1. Introduction The thermal shock test chamber is divided into two-box type and three-box type. The difference is that the test method and internal structure are different. ...
...GB- T10592-2008, GJB150.3-198, GJB360A-96 Method 107 2. Introduction of Thermal Shock Test Chamber: The thermal shock test chamber is divided into two-chamber type and three-chamber type. The difference is t...
...Test Equipment Cold Elongation Test Equipment with three stations Standard: IEC60811-1-4 common test methods for insulating and sheathing materials of electric and optical cables-part 1-4: Methods for genera...