| Sign In | Join Free | My burrillandco.com |
|
...digital display density measuring instrument, for raw materials in the field of rubber and plastic particles and density measurement application is extremely widespread, 0.001 g/cm3 precision, using water as...
...others Dart mass: MethodA: 50~ 2000g Method B: 300~2000g Result accuracy: 0.1g ( 0.1J ) Sample clamp: pneumatic. Dart release: electromagnetism Gas source: 0.5MPa~1.0MPa (self-provide) Sample size: not less ...
...Testing Equipment Operation steps: → weigh and record the weight of the clean density cup → adjust the density cup and the sample to be tested to the temperature required by the test → put the sample into t...
...Cup method. Standard: ASTM D93 Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester GB/T 261-2008 Determination of Flash Point - Pensky-Martens Closed Cup Method Parameters: Item Name Det...
...ve 79℃ and below 400℃ except fuel oils. Standard: ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester GB/T3536-2008 Petroleum Products - Determination of Flash and Fire Poin...
...-2010 and ASTM D5800 Standard test method for evaporation loss of lubricating oils by the Noack A method.It’s suitable to determine lubricating oil(especially internal combustion engine oil) and the evaporat...
DX8339 Fire Retardant Coating Combustion Tester (Daban method) Scope of application: Under specified conditions, the test method for testing the flame resistance characteristics of the facing fire retardant coa...
HD-KDRX-II Thermal Conductivity Tester (Hot Wire Method) Description: The hot wire thermal conductivity tester (transient method) is measured using the line source test method of the thermal probe. This thermal...
...Test Method for Carbon Residue of Petroleum Products-Micromethod. It is suitable to determine the the amount of carbon residue of petroleum products. The measurement range of this instrument is 0.10%(m/m)~30...
...Testing Equipment Needle Flame Test Standard: IEC 60695-11-5 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance Application: This ...
...density of SF6 gas decreased to the threshold value the replay will operate to protect the equipment prevent insulation failure of the equipment. So the reliable operation of the relay is very important. DRT...
...test probe applied with a force of 30N , IEC62368-1-Figure V.1 EC62368-1-cl.4.8 IEC62368-Annex V.1.3 Test method 2 Reference Standard: IEC62368-1-Figure V.1 Specification: Test Finger Length:234mm IEC 62368-...
... cable is subject in its own way of our criteria. Mount a sample of about 1.5m taked from the finished product,bending it to the bending test apparatus of FIG.2,and in the dimensions of the bending radius r=...
ISO 16750-4 Figure 4 Stainless Steel Test Set - Up For Splash Water Test Jet 5.4.2 Splash water test 5.4.2.1 Test method Heat the DUT in a hot air oven at Tmax for the specified holding time,th. Then splash the...
...used for protection test on the lamps of household appliances. Test method: Use this sphere probe with diameter 75±0.5㎜ to touch the lamp which is equipped with a lampshade with inconspicuous force. The sphe...
... for electrode integrated performance testing, designed under the Test Method of disposable ECG electrode ANSI/AAMI EC12:2000(R2005) Disposable ECG electrodes Test items Incentive conditions scope Accuracy T...
...Testing Machines , Sofa Durability Testing Equipment Product description: Seat, back and arm rest of sofa durability testing equipment property test mainly test durability of seat, back and arm rest. Using c...
...Test Plane Strollers Testing Machine , Electronic Strollers Stability Tester 1,Testing purposes: Tilt 12 ° Test Plane Electronic Strollers Stability Testing Machine the stability of the simulation tests to d...
... for low/high temperature test chambers GB/T 2423.1-2008 Environmental testing - Part 2: Test methods - Tests A: Cold GB/T 2423.2-2008 Environmental testing - Part 2: Test methods - Tests B: Dry heat GB/T 24...
... for low/high temperature test chambers GB/T 2423.1-2008 Environmental testing - Part 2: Test methods - Tests A: Cold GB/T 2423.2-2008 Environmental testing - Part 2: Test methods - Tests B: Dry heat GB/T 24...