| Sign In | Join Free | My burrillandco.com |
|
... and IEC60884-1fig22-26. It is used for the mechanical strength test of households and similar use of plug sockets, electrical accessories like switches and shrouds, etc. Standard of Impact Testing Equipment...
Automatic Electric Fabric Testing Equipment Veritical With Power Ac220V,50Hz Description: Textile Testing Equipment is suitable for vertical combustion test for clothing fabric, decorative fabric, tent fabric w...
IEC60598 Electrical Safety Test Equipment Black Rectangular Draught - Proof Enclosure 1. Introduction Draught-proof enclosure is designed according to IEC60598.1 annex D, it is applied to thermal test of lumina...
...Test Equipment - Automatic Energy Meter Calibration by GENY Product Overview Guangzhou GENY Electric Co., Ltd's YC1893D Meter Test System incorporates advanced electronic measurement technology and modular d...
... appliances of other electronic products. If damage occurs from the Impact Hammer test .Accessibility probes can be used to measure the extent or severity of the damage. The Impact Hammer simulates the mecha...
...Electrical Safety Test Equipment 1. Introduction RK2682 Insulation resistance tester is sepcial designed according to IEC, BS and UL standards, the test voltage has DC500 and DC1000V ranges, the insulation r...
... Feature Electric drive Weight 100kg Volume 600×1500×700cm Test standard JIS, CNS Equipment Description: Heating deformation testing machine imposed load in high-temperature environments and measurement of c...
...-terminal method to output test current, which is stable and reliable, and is widely used in grounding reliability testing of mechanical and electrical product production lines; suitable for safety regulatio...
...-outlets and couplers non-rewireable accessories. Adopts the servo motor to drive the turntable, to make the specimen to swing left and right, the test will be automatically stopped when the test cycles reac...
...Testing Equipment IEC 60598-2-13 Production introduction: This test equipment conforms to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 standard requirements. It is used for the ground accessed luminaires...
... (IP Code)>. This equipment is applied in IPX3 ,IPX4 waterproof degrees testing purposes, which are widely adopted by luminaire products, electrical and electronic products certification institutions, testin...
...Testing Equipment For Circular Saw Switch And Lower Guard Standard of IEC Testing Equipment: IEC 60745-2-5 Hand-held motor-operated electric tools – Safety – Part 2-5: Particular requirements for circular sa...
...Testing Equipment For Circular Saw Switch And Lower Guard Standard of IEC Testing Equipment: IEC 60745-2-5 Hand-held motor-operated electric tools – Safety – Part 2-5: Particular requirements for circular s...
IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment Complied Standards & Clauses This equipment is in accordance with the vehicle rolling standard clauses in Section 6.21 of the GB/T...
...-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. It is used to verify whether electrical accessories such as electric vehicle charging interfaces, industrial plugs, socket-out...
...Test and Close time Test Equipment with Circular Saw at a 90° cut Product information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19,IEC60745-2-5:2003 and Annex BB. It is us...
Test finger nail , IEC 60335-1 Figure 7 Test Equipment Test finger nail Product information: The test finger nail complies with the IEC 60335-1figure 7 standard requirements. It is applicable for the non-remova...
...Electrical Safety Test Equipment Inclined Plane Device 1. Description of Inclined Plane Device: This inclined plane device is designed and manufactured in accordance with the IEC60335-1 clause 20.1. The Stab...
... resistance Feature Electric drive Weight 55kg Volume 42.5×16×100cm Test standard UL, CSA, VDE, BS, SAA, FCC 2.Product Summary: Insulation resistance tester is specialized in testing voltage resistance of va...
...Test Equipment According to IEC60335-2-23 1.Introduction Power cord flexing test apparatus is designed according to GB4706.15 and IEC60335-2-23 clause 11.101, it is applied to do flexing test for appliance f...