Total 3385 products for surge test procedure Manufacture & Suppliers

• Low Voltage Surge Generator 12kV 864J Discharge Power 400W Impact

  

  ...Surge Generator Product Overview The XHHV510-10L high-voltage pulse generator is designed for shock discharge during cable fault testing and DC withstand voltage testing of electrical equipment. This compact...

  Xi'an Xu&Hui Electromechanical Technology Co., Ltd.

  China

  Verified Supplier

  Add to cart

  Contact Supplier

• Class I Test 50kA SPD Surge Protector With Multi Layer GDT Structure

  

  ...Test 50kA (10/350μS) SPD Surge Protector Multi-Layer GDT Structure OBV50/160 Data Uc(maximum continuous operating voltage) 275V Iimp(impulse discharge current for class I test) 50kA Imax(maximum discharge cu...

  Guangdong Uchi Electronics Co.,Ltd

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 35kV Zinc Oxide High Voltage Surge Arrester For Power Distribution Substation

  

  ... to check the seal situation, if the seal is not strict will inevitably cause internal dampness, so that the insulation resistance obviously decreased. In accordance with the pre-test procedure, the measurem...

  WENZHOU QIUPU ELECTRIC POWER CO., LTD.

  Zhejiang,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Lightning Surge Generator 1089 Series For Lightning Simulation Testing

  

  Lightning surge generator1089 Series SUG 1089 series of products are made in accordance with the requirements of part 68 of the FCC of the Federal Communications Commission (FCC) on the protection of telecommun...

  KingPo Technology Development Limited

  Hong Kong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 60068 Temperature Humidity Walk In Environmental Test Chambers

  

  ...Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT” IEC 60068-2-14:1984 "Basic environmental testing procedures-Part 2: Tests-Test N: Change of temperature, IDT" IEC 60068-2-30:2005 “Environmental T...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Cast Aluminum Helium Leak Testing Equipment 7min/Pc , High Voltage Switchgear Vacuum Helium Leak Detection System

  

  ...Test System 7min/pc 5bar Pressure This helium hood lea test system for SF6 switch gears is with rectangular bell vacuum chambers, two chambers can work linkage, the cycle time is 7 min/pc, can filling helium...

  Guangzhou HongCe Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60068 High And Low Temperature Test Chamber Low Pressure 250L 500L

  

  ...-Part 2-1: Tests- Test B-Dry heat, IDT” IEC 60068-2-13:1983 "Basic environmental testing procedures–Part 2: Test M: Low air pressure, IDT" IEC 60068-2-39: 1976 "Basic environmental testing procedures-Part 2:...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Office Chair Forefoot Stability Tester Weight Load Test Furniture Test

  

  ...Test Furniture Test PRODUCTS DESCRIPTION The Chair Stability Tester is used to perform the forwards overbalancing test. DESIGN STANDARD: BIFMA 5.1 STANDARD FEATURES: Test Platform: 1800x1000mm The Max. Load ...

  Guangdong Haida Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Office Chair Tilting Tester Chair Back Fatigue Stress And Wear Test

  

  ...durability. Test Standard:BIFMA X5.1 2017 Test Images: Refers to Bifma x5.1 2017 clause 9 Tilt Mechanism Test - Cyclic Test Procedure: 1)The unit shall be cycled for 300,000 cycles at a rate between 10 and 3...

  Guangdong Haida Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 60068-2-32 Procedure 1 Free Fall Test Machine For Impact Resistance For Packaging Falling

  

  ..., ISO2248, JISZ0202-87, GB/T4857.5-92, etc. This machine is specially used to test the damage of product packaging caused by falling, and to evaluate the impact resistance during transportation and handling....

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 300 V EMC Test Equipment , Lightning Surge Generator PLC Touch Screen

  

  IEC61000-4-5 EMC Test Equipment 6KV Lightning Surge Generator with 10A CDN Introduction: LSG-6K10 surge generator is designed according to IEC61000-4-5 and GB/T17626.5,and completely meet the requirements of th...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• RJ 45 SPD Surge Ethernet Protective Devices Network Cable Signal ethernet surge protector

  

  ...Surge Protector RJ45 ethernet surge protection devices Ethernet Signal Surge Protector RJ45: Function: Protect equipment that transmit video/digital signal by coaxial-cable from high voltage surges. Features...

  Britec Electric Co., Ltd.

  Zhejiang,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 60695-2-10 Glow Wire Test Equipment Flame Testing Chamber

  

  ...Test Equipment Fire Hazard Testing Chamber Complied Standards & Clauses IEC60695-2-10 "Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure" IE...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Electric Bike Motor Stator Testing Machine High Accuracy Fast Test Speed

  

  ... of electric bike motor stator. With high accuracy and fast test speed, the testing machine is able to test Hipot, insulation resistance, surge, winding resistance at one-stop. 2. Test item: AC Hipot, insula...

  Qingdao AIP Intelligent Instrument Co., Ltd

  Shandong,China

  Active Member

  Add to cart

  Contact Supplier

• Accelerated Weather Resistance Environmental Test Chamber With Xenon Arc Lamp

  

  Accelerated Weather Resistance Environmental Test Chamber With Xenon Arc Lamp Characters ◆The test procedures can be programmed freely; and upto 16 predetermined procedures can be saved in one time. Every proce...

  Guangdong Sanwood Technology Co.,Ltd

  China

  Verified Supplier

  Add to cart

  Contact Supplier

• LCD Display Chair Caster / Base Furniture Testing Machines Abrasion Resistance Test Machine

  

  ...Testing Machines Abrasion Resistance Test Machine Product Description: Chair Caster Test Machine is designed for evaluating the ability of chair base and casters to withstand fatigue stresses and wear caused...

  Guangdong Haida Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 60695-2-12 Glow Wire Test Apparatus Flammability Test Equipment

  

  ...Test Apparatus For Electric Vehicle Components Complied Standards & Clauses IEC60695-2-10 “Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Crude Oil Surge Tank - Oil surge tank - double compartment surge tank - signle compartment surge tank

  

  Crude Oil Surge Tank - Oil surge tank - double compartment surge tank - signle compartment surge tank Surge tank can be taken as two phase secondary separtion after three phase separator which hold a constant p...

  CCSC Petroleum Equipment Ltd Co

  Shanghai,China

  Active Member

  Add to cart

  Contact Supplier

• Type 1 + 2 Surge Protection Device For Three Phase TN-S System

  

  ... systems: TN-S system. • Remote status monitoring. • BR-12.5M 320 4P compliant with EN/IEC 61643-11 standards, tested and specified according to both T1 and T2 test classes. 320 V Type 1...

  Britec Electric Co., Ltd.

  Zhejiang,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Thermoplastic Spd Surge Protector IP20 4 Pole Lightning Arrester Surge Protection Devices

  

  ...Surge Protector Features: • Impact discharge current of per pole reaches 50kA(10/350µs). • Fast response time less than <100ns. • Max. backup Fuse: 315A gG. • Status indicator. • Fault signal contact. • 35mm Din rail mountable. • BR-50GR 4P is suitable for TN-S system. • It has passed the class I lightning protection test conducted by national professional testing......

  Britec Electric Co., Ltd.

  Zhejiang,China

  Verified Supplier

  Add to cart

  Contact Supplier