Nickel Electroplating Machine
1. Main parameters of electroplated nickel production line
| 1.1. material:steel wire or copper wire； |
| 1.2. wire diameter range:φ0.1～φ3 mm； |
| 1.3. coating type:nickel; |
| 1.4. coating thickness:1~30μm； |
| 1.5. wire lines:single or multi； |
| 1.6. speed:≤300m/min |
2. Technological process of production
pay off→cathode discharge oil→water rinsing→anode discharge
oil→water rinsing → pickling→ water rinsing → pre-plating nickel →
water rinsing → nickel plating → water rinsing → hot water rinsing
→ drying→protection→drying→take up
3. Main process introduction
Cathode discharge oil: remove the oil on the surface of copper wire
to ensure the binding force of the coating .
Anode discharge oil: same as the cathode discharge oil.
Pickling: remove the oxide from the surface of the product.
Water rinsing: clean the product thoroughly after the tank to avoid
mutual contamination of the tank.
Pre-nickel plating : as a pre-coating, to ensure the subsequent
coating and base binding force.
Nickel plating : thickened nickel coating.
Protection:It has a rust proof sealing effect and does not affect
the appearance, weldability, conductivity, and other properties of
the coating.
4. Solution preparation
Pre-nickel plating solution: Ni(SO3NH2)2 400~600mL/L
NiCl2 5~15g/L
H3BO3 40~60g/L
Nickel plating solution: Ni(SO3NH2)2 400~600mL/L
NiCl2 5~15g/L
H3BO3 40~60g/L
Softening agent 8~12mL/L
Brightening agent 0.2~0.8mL/L
5. Packaging & Shipping
We can pack it by pallet, or according to the customers' specific
requirements.
Port: Shanghai/Ningbo
6. Our Services
In order to guarantee the customers are able fully to operate the
machine, if the customer need, we can help customer training,
includes:
(1) Correct operating mode
(2) Correct maintenance way
(3) Correct technological process control
(4) Remove simple problem
All the electroplating machine of our company have already been
widely used in electroplating area.
Any doubt please contact us.
