Ultrasonic Spray Coating with Conveyor for Thin Film Photovoltaic
Cells Solution Coated
Description:
Ultrasonic precision spraying machine conveyor belt type is a
device that uses ultrasonic technology to achieve precision
spraying, in which a conveyor belt is used to transport the object
to be sprayed.
Ultrasonic precision spraying machine is a high-precision spraying
equipment that uses ultrasonic vibration to atomize liquid spraying
agent into small particles, and then evenly sprays them onto the
target surface through air flow. This spraying method has the
advantages of high precision, high efficiency, and saving spray
agents, and is widely used in various spraying processes.
The conveyor belt is a component of the ultrasonic precision
spraying machine, used to transport objects to be sprayed. The
conveyor belt is usually a strip structure made of wear-resistant
materials, which can transport objects from the starting point to
the endpoint during the spraying process. By controlling the speed
and movement trajectory of the conveyor belt, precise positioning
and spraying of objects can be achieved.
The use of conveyor belt ultrasonic precision spraying machine can
carry out spraying operations on continuous production lines,
improving work efficiency and production quality. In an automated
production environment, the conveyor belt ultrasonic precision
spraying machine can cooperate with other equipment to achieve
automated production processes, reduce manual operations, and
improve production efficiency.
In summary, the ultrasonic precision spraying machine conveyor belt
type is a device that uses ultrasonic technology for precision
spraying. Through the conveyor belt, the object to be sprayed is
transported from the starting point to the endpoint, achieving
efficient and high-precision spraying operations.
Parameters:
| Product Type | Benchtop Ultrasonic Spray Coating Machine with Conveyor FS650X |
| Spray Nozzle Operating Frequency | 20-200KHz (Normally use 60100K) |
| Nozzle Power | 1-15W |
| Continuous Spraying Volume Max | Determine based on the type and quantity of nozzles configured (Max
5 Nozzles) |
| Effective Spraying Width | Determine based on the type and quantity of nozzles configured |
| Spray Uniformity | ≥95% |
| Solution Conversion Rate | ≥95% |
| Dry Film Thickness | 20nm-100μm |
| Solution Viscosity | ≤30cps |
| Temperature Range | -10-60℃ |
| Atomized Particles (Median Value) | 10-45μm (distilled water), determined by the frequency of the
nozzle |
| Diversion Pressure Max | ≤0.15MPA |
| Material of the contact solution part | SUS304, Titanium, PTFE |
| Exercise Mode | A spraying control system independently developed by FUNSONIC based
on the Windows system, with PLC control, 15.6-inch full-color touch
screen, XYZ three-axis imported servo motor, R-axis start rotation,
and fully enclosed precision screw module+Horizontal automatic
conveying mechanism |
| Control Mode | PLC control, operation control system developed based on Windows
system, supporting remote operation, upgrading, etc |
| Control Content | The touch screen integrates ultrasonic nozzle, liquid supply,
heating, adsorption, ultrasonic dispersion and other controls, and
also has system monitoring, alarm and other functions |
| Liquid Supply Method | Precision injection pump |
| Ultrasonic Dispersion System (Optional) | 20ml or 50ml, 40K, biological grade sampler |
General configuration:
1. Viscosity and solid content: Typically, viscosity ≤ 30cps, and
suspension requires a solid content not exceeding 20-30%
2. Liquid supply equipment: precision injection pump+biological
grade sampler, with a liquid supply accuracy of 0.1uL/min
3. Dry film thickness: 20nm-100um (related to the substrate of the
solution)
4. Input voltage: 220V ± 10%, 50-60Hz
5. Solution conversion rate: ≥ 95%, utilization rate several times
that of traditional two fluid pneumatic nozzles
6. Atomized particle size: average 15-45 μ m. It mainly depends on
the frequency of the nozzle, and the higher the frequency, the
smaller the particle size
7. Spray nozzle frequency: can be equipped with various spray
nozzle systems ranging from 30-200KHz
Optional configuration:
1. Ultrasonic dispersion liquid supply system: It can continuously
disperse and stir nanoparticles during the spraying process,
effectively reducing the precipitation phenomenon of the spraying
liquid and greatly improving the uniformity of the film layer
2. Heating and drying platform: using aviation aluminum porous
platform or precision micro porous ceramic platform, with precise
temperature control of 200 ℃
3. Vacuum adsorption platform: equipped with a multi-channel vacuum
generator that can be controlled by zones, accurately adsorbing the
thin film substrate without deformation.
4. Spray nozzle alignment device: Laser alignment is used.
5. We can also customize other configurations that you need!
Ultrasonic Spray Coating with Conveyor for Thin Film Photovoltaic
Cells Solution Coated
