KEYE OEM Camera Visual Inspection Machine for Plastic Empty Bottles
| System operating parameters |
| Dimensions | See the design drawings for details | Power and frequency | 220V 20A 50HZ |
| Total power | 3kw ~ 4kw | Air pressure | 0.5~0.8MPa Purify and oil-free |
| Working temperature | -20℃ ~ 60℃ | Working humidity | Below 50% relative humidity |
Inspection standards
| Item | Camera | Position | Inspect | Precision | Accuracy | Speed |
| KVIS | 4 | bottle thread | filling material,hole,black spot,oil stain,deformation,flash | >0.3mm | 99% | 150pcs/min |
| 1 | Inner wall | filling material,oil stain,flash |
| 1 | outer area | oil stain,bubble,hole,scratch |
| 1 | inner area | black spot,stain |
| 1 | bottle shoulder | black spot,stain |
**For defect features such as black spots and bubbles, the gray
value contrast difference corresponding to the detection index must
be greater than 30 (it can be understood as: put the sample at an
arm’s length, about 30cm or more, and the defect features can be
seen visually), which can be effectively detection. If the sample
has transparent oil stains or light-colored black spots, and the
gray value contrast difference is low (less than 30), the detection
effect cannot be achieved. Due to the different complexity of the
structural features of different products, in actual application,
there will be a certain detection blind spot in the structural
overlapping area of the plane lens imaging, and the image
acquisition cannot reach the range of this blind spot, so it cannot
effective detection.
Inspection principle
Our company's design scheme uses 8 sets of high-resolution
industrial cameras and high-performance strobe light sources to
conduct comprehensive visual inspections for product appearance
defects. The inspection speed is 150 pieces/minute, and the
equipment can operate 7*24 hours a day. Unqualified products can be
automatically removed online.
Company profile
KEYETECH has always been committed to the application of artificial
intelligence in the field of vision technology, replacing human
eyes and brain decision with machine vision and AI reasoning
calculations, and integrating the quality detection and sorting to
industrial products in traditional manufacturing to make the
production more digitization , Intelligence, visualization, and
persistence. Also greatly improves the efficiency and accuracy of
industrial detection, and enhances the intelligent level of the
manufacturing industry.
** Our company have served many well-known enterprises such as
Coca-Cola, P&G,Unilever,ALPLA,C'estbon, Nongfu Spring, etc.,
and has won praise from many users.
After-sale Service
The company has a complete technical service team and rapid
response mechanism, and has dedicated service specialists for each
customer, who can receive technical consultation and fault reports
from customers at any time. And to ensure rapid response to
customer emergencies, to ensure that customers receive satisfactory
service.During the epidemic or due to special reasons, when
after-sales engineers are unable to reach the site, the service
center can remotely adjust customer equipment for troubleshooting
and technical consultation.
After the equipment arrives at the customer site, the after-sales
engineer arrives in time to carry out equipment installation,
commissioning, and operation training. The product quality of the
whole machine is traceable, and the quality warranty period is 1
year from the date of acceptance. In the event of non-human faults
during the warranty period, after-sales engineers will quickly
arrive at the site or provide remote guidance for free maintenance.
