K30 Ground Solid Tungsten Carbide Rod H6 Tolerance For Endmills
Reamers
We manufactured tungsten carbide rods extruded or pressed. Diameter
from 0.3mm to 35mm,
length in 310mm, 330mm or 340mm, or others
Grade in YL10.2, K10, K20 K30, K35 or etc.
We manufactured and stocked a large range of dimensions unground
and ground carbide rods for you, which guarantee our fast delivery.
Our standard size models:
Size range(DiaXL mm) | Tolerance |
D(blank, mm) | D (ground, mm) | L(mm) |
| Dia(0.3-0.9)x330 | +0/+0.3 | h6/h7 | 0/+2 |
Dia(1-5)x330 | +0.3/+0.4 | h6/h7 | 0/+2 |
Dia(6-20)x330 | +0.3/+0.6 | h6/h7 | 0/+2 |
Dia(21-40)x330 | +0.5/1.0 | h6/h7 | 0/+3
|
| For any other sizes, we are able to custom-made according to
clients’ requirements or drawings. |
Specification
| Material: | tungsten carbide |
| Dimension: | Dia12*75/100/150mm 2.0*330mm various size for choose |
| Ground Tolerance: | h6 based on requirement |
| Blank tolerancce: | +0.3~0.5mm |
| Grade: | K20 K30 K10, YL10.2, YG20 YG10X |
| Production Process: | Power mixing-Pressing-HIP sintering-Blank- Processing- Finished |
| Type: | round rod |
| Surface: | blank or grinding |
| Performance | High hardness, wear /corrosion resistancce, good toughness, good
straightness |
| Non-standard or tolerance | can be customized |
Application of tungsten carbide rod
Our tungsten carbide rod manufactured with high hardness and
toughness, vibration-resistance, especially no stick when working ,
it is widely used for making various kinds of carbide solid tools
and cutting tools, such as drills, end mills, thread taps, rotating
file,etc. A good material for general-purpose. Suitable for
machining carbon steel, cast irons, stainless steel,
heat-resistance steel, nickel based alloys and titanium alloys.
Production Features
- All carbide rods are made from the best tungsten carbide powders.
The carbide rods are with submicron and average grain size ,the
powder is even and stick together firmly,the purity of tungsten
carbide powders is quite high.
- All carbide rods are made by the extrusion machine which insure
that the inside structure of carbide rods is excellent and
apprerance of carbide rods if better ,the flatness is improved a
lot .
- All carbide rods are through HIP sintering which insure that the
inside structure of carbide rods is free pore and can stick
together firmly .Also the TRS is improved around 30% after HIP
sintering.
- large stock of regular sizes of carbide rods ,which can enable us
to make the delivery within 24 hours.
- Replacement .we will replace the carbide rods for you if there is
any defects.
Carbide Rod Grade Information
Carbide Rods Grades for Cutting Tools
| Grade | ISO Grade | WC% | Co% | Grain Size μm | Hardness (HRA) | Density g/cm3 | T.R.S. N/mm2 | Application |
| YG6X | K10 | 94 | 6 | 0.6-0.8 | 14.9 | 92 | 2000 | Suitable for processing Chilled cast iron, heat-resistant alloy
steel, and fine process of common cast iron |
| YL10.2 | K25-K35 | 90 | 10 | 0.6-0.8 | 14.5 | 92.5 | 3800 | Wear resistance and strength comparatively higher,suitable for PCB
micro drills,for making drills,end mill,reamer,taps,burrs etc. |
Cutting steel class grade
| Grade | ISO Grade | Density g/cm3 | Hardness HRA | T.R.S N/mm2 | Application |
| YT5 | P30 | 11.50-13.20 | 90.0 | 1750 | Suitable for heavy duty cutting of steel and cast steel and for a
low-speed and medium-speed and a big feed-rate roughing operation
under unfavorable machining conditions |
| YT14 | P20 | 11.20-11.80 | 91.0 | 1550 | Suitable for semi-finishing and finishing machining of steel and
cast steel, using a medium feed-rate |
| YT15 | P10 | 11.10-11.60 | 91.5 | 1500 | Suitable for semi-finishing and finishing machining of steel and
cast steel and a medium feed-rate and a rather high cutting speed
is to be recommended |
| YC40 | P40 | 13.00-13.40 | 89.5 | 1860 | Suitable for heavy duty cutting of steel and cast steel with a
possible big feed-rate and for face milling as well. |
| YW1 | M10 | 12.85-13.40 | 92.0 | 1380 | Suitable for semi-finishing and finishing of stainless and ordinary
alloyed steel |
| YW2 | M20 | 12.65-13.35 | 91.0 | 1680 | Suitable for semi-finishing and finishing of stainless and low
alloyed steel, mainly used for machining of trains' wheel hubs |
| YW3 | M10 | 12.85-13.10 | 92.0 | 1420 | It is suitable for semi-finishing and finishing of stainless and
ordinary alloyed steel |
We guarantee:
* We are real factory in Zhuzhou
* Manufactured with100% tungsten carbide raw material
* Comply with ISO 9001:2015 Certification
* Rich experience of over 10 years
* Advanced technology , automatic pressing , HIP sintering
* Full ability to accept OEM & ODM orders
* Strict inspection for quality of raw material and finished
products
Our tungsten Carbide Rod Type
For more detail size,pls email us,thanks
