YL10.2 HRA 92.5 Ground Tungsten Carbide Rod With Small Hole
0.15/0.2/0.3mm
| Grade | YL10.2 (K25-K35) |
| Co | % | 10 |
| WC | % | 90 |
| Density | g/cm3 | 14.5 |
| HV30 | kg/mm2 | 1600 |
| Hardness | HRA | 92.5-92.8 |
| Bending Strength | N/mm2 | >3800 |
| Porosity | A B C | A02B00C00 |
| WC Grain Size | μm | 0.6 |
Application:
Application of tools:
Twist drill,End mill,Tap
Applications of material:
◆ Cast iron
◆ Stainless steel,Heat-resistant steel,Hardened
steel(hardness<60HRC)
◆ Nickel-based, Titanium alloys
We can supply all kinds of dimensions solid carbide rods with
fine&sub micron grain size We manufactured and stocked many
dimensions of ground and unground carbide rod for your. We have a
large range of grade for your choice. We also can develop grade
based on your application.
We offer:
- pressed and extruded unground, ground and polished rods with or
without chamfers
- rod products that can be ground to h6 tolerances
- carbide rod with one or two parallel holes
- a variety of grades that provide exceptional wear and impact
resistance
- grades for use in end mills, reamers, drills, countersinks,
engraving tools, routers, and other rotary tools
- grades for use in a broad range of applications in almost any
material
- grade for stamping /colding/ forging dies
Solid Rods and Rods with Coolant Hole
We manufactures 12” (330mm) length rods with single hole, straight
two-hole in diameters from 0.3mm to 33mm. High-performance gun
drill rod blanks are available.
Cut-to-Length Rod
We have one of the largest and most complete lines of ground CTL
selections. Premium grades, standard and micro-finished surface
finish, and h6 ISO diameter tolerances in inch and metric lengths
and diameters. Special preform features are available, including
male center, female center, ballnose, step reduction, and shaped
points.
Production Process of Tungsten Carbide Rod:
Power mixing-Pressing-HIP sintering-Blank- Processing- Finished
Various grade for your choice
| Grade | YL10.2 | YG6 | YG6X | YG10X | YG8 | YG15 |
| ISO Range | K25-K35 | K20 | K10 | K35 | K30 | K40-K50 |
| WC+others % | 90 | 94 | 94 | 90 | 92 | 85 |
| Co % | 10 | 6 | 6 | 10 | 8 | 15 |
| Grain Size μm | 0.6 | 0.8 | 0.6 | 0.6 | 0.8 | 0.8 |
| Density g/cm3 | 14.5 | 14.9 | 14.9 | 14.5 | 14.6 | 14.1 |
| Hardness HRA | 92.5-92.8 | 89.5 | 92 | 90 | 89 | 86.5 |
| T.R.S N/mm2 | 3800-4000 | 2150 | 2000 | 2200 | 2200 | 2400 |
| Grade | Application |
| YL10.2 | ultra-fine grain WC+ 10% Coblat, with good Wear resistance and
Toughness, strength comparatively higher,suitable for PCB micro
drills,for making drills,end mill,reamer,taps,burrs etc. |
| YG6 | Fine Grain WC+6% Cobalt, with Good Wear resistance, used for hard
wood,processing original wood,aluminum section bar,brass rod and
cast iron. |
| YG6X | ultra-fine grain size with cobalt 6%,with good wear
resistance,Suitable for processing Chilled cast iron,
heat-resistant alloy steel, and fine process of common cast iron |
| YG10X | ultra-fine grain WC+ 10% Cobalt, suitable for small diameter Micro
drill ,vertical milling cutter, rotating file |
| YG8 | fine GrainWC+ 8% Cobalt Suitable for the roughening of cast iron
and light alloys and also for the milling of cast iron and
low-alloy steel. |
| YG15 | fine grain WC +15% Cobalt for mining tools, cold heading and
punching dies |
Production Advantages
1. we using 100% WC and the raw matearils of CO.
2. High hardness HRA89-93 ,good bending strength TRS
2800-4200.N/mm2
3. Long probation,stamping.
4. Has good wear resitance.
5. Professional manufacturer for more than 10years experience.
6. With the HIP sintered technology,the structure of tungsten
carbide is more uniform,more dense,the TRS can be raised more than
20%
7. We make tungsten carbide rods extruded or pressed.
8. Customization is acceped
Part of our carbide rod Size List
| D | DTol | d | dTol | L | Tol |
| mm | mm | mm | mm | mm | mm |
| 2.5 | +0.20～0.50 | 0.3 | ±0.05 | 330 | 0～+5.0 |
| 4.0 | +0.20～0.50 | 1.0 | ±0.05 | 330 | 0～+5.0 |
| 6.0 | +0.20～0.50 | 1.0 | ±0.05 | 330 | 0～+5.0 |
| 8.0 | +0.20～0.50 | 1.5 | ±0.05 | 330 | 0～+5.0 |
| 10.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 12.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 14.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 16.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 18.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 20.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 22.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 24.0 | +0.40～0.80 | 4.0 | ±0.05 | 330 | 0～+5.0 |
| 26.0 | +0.40～0.80 | 5.0 | ±0.05 | 330 | 0～+5.0 |
We manufactured and stocked unground and ground carbide rods for
you. For more size information, please kindly email or call us.
We guarantee:
* We are real factory in Zhuzhou
* Full ability to accept OEM & ODM orders
* Manufactured with100% tungsten carbide raw material
* Comply with ISO 9001:2015 Certification
* Strict inspection for quality of raw material and finished
products
* Rich experience of over 10 years
* Advanced technology , automatic pressing , HIP sintering
Our packing and shipping
Based on Detail products, we use different Standard packing
suitable overseas shipment.
For carbide rod packing as following
1. outsizde carton or plywood case
2. inner packing is plastic box or small carton with cotton or
paper protection
3. Shipping:UPS,TNT,EMS,Fedex,DHL, shipment by sea, or as you
request.
