Ground Well Polished Tungsten Carbide Plunger Rod With High
Precision
Application Range:
our cemented carbide plunger widely used in high pressure pump,
high pressure cleaning pump, High-power high-pressure pump group,
High Pressure Pump Automatic Set,Pipe dredge, High-pressure oil
injection machinery etc.
Detail Information
-. Material: WC+Ni or WC+Co Grade:YN8 (8% Ni)
-. Hardness: HRA89 Bending strength:3500
-. Size: Dia25*277mm Customized
-. Features: Wear Resistance, Corrosion Resistance
-. Surface finishing: Ra0.4
-. Straightness:0.005
-. Technology: HIP sintering
All technical data only for reference. We can make based non
requirement
Grade information of tungsten carbide plunger rod
Grade | Density(g/cm3) | Hardness(HRA) | Toughness(N/mm2) | Composition |
| | | | |
| | | | |
| YG11 | 14.5 | 87 | 2100 | Co11% |
| | | | |
| | | | |
| | | | |
| | | | |
Our advantage:
1. Material: using high quality raw material
2. Production Procedure: Powder preparing- Pressing-HIP sintering-
Processing-Finishing
3. Perfect quality control systerm: ISO9001:2015
4. Various dimension for choosing
5. Various grade for choosing based on your application. the
hardness is from HRA82 to HRA92.5
6. We also accept manufacturing based on your drawing
7. We have professional technician team and sales team, giving you
professional suggestion
We can supply all kinds of dimensions solid carbide rods with
fine&sub micron grain size We manufactured and stocked many
dimensions of ground and unground carbide rod for your. We have a
large range of grade for your choice. We also can develop grade
based on your application.
We offer:
- pressed and extruded unground, ground and polished rods with or
without chamfers
- rod products that can be ground to h6 tolerances
- carbide rod with one or two parallel holes
- a variety of grades that provide exceptional wear and impact
resistance
- grades for use in end mills, reamers, drills, countersinks,
engraving tools, routers, and other rotary tools
- grades for use in a broad range of applications in almost any
material
- grade for stamping /colding/ forging dies
We make tungsten carbide rods extruded or pressed.
Diameter from 0.3mm to 40mm,
length in 310mm, 330mm or 340mm.
Grade inYL10.2, K10, K20 K30, K35 or etc.
Production Advantages
1. we using 100% WC and the raw matearils of CO.
2. High hardness HRA89-93 ,good bending strength TRS
2800-4200.N/mm2
3. Long probation,stamping.
4. Has good wear resitance.
5. Professional manufacturer for more than 10years experience.
6. With the HIP sintered technology,the structure of tungsten
carbide is more uniform,more dense,the TRS can be raised more than
20%
7. We make tungsten carbide rods extruded or pressed.
8. Customization is acceped
Production Process:
Power mixing-Pressing-HIP sintering-Blank- Processing- Finished
Other Application industries:
The carbide rods be widely used in
- metal Working industry
- motorcycle manufacturing industry
- electronin industry
- other mold
- mechanical manufacturing industry
- military defense Industry
- jewelry
Some key areas where cemented carbide components are used:
- Automotive components
- Rotary cutters for high-speed cutting of artificial fibres
- Metal forming tools for wire drawing and stamping application
- Rings and bushings typically for bump and seal applications
- Woodworking, e.g., for sawing and planingapplications
- Pump pistons for high-performance pumps (e.g., in
nuclearinstallations)
- Nozzles, e.g., high-performance nozzles for Oil drilling
applications
- Roof and tail tools and components for high wear resistance
- Balls for ball bearing and ball point pen
other grades of tungsten carbide rod
| Grade | YL10.2 | YG6 | YG6X | YG10X | YG8 | YG15 |
| ISO Range | K25-K35 | K20 | K10 | K35 | K30 | K40-K50 |
| WC+others % | 90 | 94 | 94 | 90 | 92 | 85 |
| Co % | 10 | 6 | 6 | 10 | 8 | 15 |
| Grain Size μm | 0.6 | 0.8 | 0.6 | 0.6 | 0.8 | 0.8 |
| Density g/cm3 | 14.5 | 14.9 | 14.9 | 14.5 | 14.6 | 14.1 |
| Hardness HRA | 92.5-92.8 | 89.5 | 92 | 90 | 89 | 86.5 |
| T.R.S N/mm2 | 3800-4000 | 2150 | 2000 | 2200 | 2200 | 2400 |
| Grade | Application |
| YL10.2 | ultra-fine grain WC+ 10% Coblat, with good Wear resistance and
Toughness, strength comparatively higher,suitable for PCB micro
drills,for making drills,end mill,reamer,taps,burrs etc. |
| YG6 | Fine Grain WC+6% Cobalt, with Good Wear resistance, used for hard
wood,processing original wood,aluminum section bar,brass rod and
cast iron. |
| YG6X | ultra-fine grain size with cobalt 6%,with good wear
resistance,Suitable for processing Chilled cast iron,
heat-resistant alloy steel, and fine process of common cast iron |
| YG10X | ultra-fine grain WC+ 10% Cobalt, suitable for small diameter Micro
drill ,vertical milling cutter, rotating file |
| YG8 | fine GrainWC+ 8% Cobalt Suitable for the roughening of cast iron
and light alloys and also for the milling of cast iron and
low-alloy steel. |
| YG15 | fine grain WC +15% Cobalt for mining tools, cold heading and
punching dies |
Our Various Size List
Grinding | Blank |
D | L | D | L |
(mm) | Tol.(mm) | Tol.(+1mm) | (mm) | Tol.(mm) | Tol.(+3mm) |
| 0.7 | h6 | 330 | 1 | +0.2 | 330 |
2 | h6 | 330 | 2.2 | +0.2 | 330 |
3 | h6 | 330 | 2.7 | +0.2 | 330 |
3.175 | h6 | 330 | 3.2 | +0.2 | 330 |
4 | h6 | 330 | 3.7 | +0.2 | 330 |
5 | h6 | 330 | 4.2 | +0.2 | 330 |
6.35 | h6 | 330 | 4.7 | +0.2 | 330 |
7 | h6 | 330 | 5.2 | +0.2 | 330 |
8 | h6 | 330 | 5.7 | +0.2 | 330 |
9 | h6 | 330 | 6.2 | +0.2 | 330 |
10 | h6 | 330 | 6.7 | +0.2 | 330 |
12 | h6 | 330 | 7.7 | +0.3 | 330 |
12.7 | h6 | 330 | 8.2 | +0.3 | 330 |
13 | h6 | 330 | 8.7 | +0.3 | 330 |
14 | h6 | 330 | 9.2 | +0.3 | 330 |
15 | h6 | 330 | 9.7 | +0.3 | 330 |
16 | h6 | 330 | 10.2 | +0.3 | 330 |
17 | h6 | 330 | 10.7 | +0.3 | 330 |
18 | h6 | 330 | 11.2 | +0.3 | 330 |
19 | h6 | 330 | 11.7 | +0.3 | 330 |
20 | h6 | 330 | 12.2 | +0.3 | 330 |
| 25 | h6 | 330 | 14.3 | +0.3 | 330 |
| 30 | h6 | 330 | 16.2 | +0.3 | 330 |
For more size information, please kindly email or call us.For
length, we can cut to any size.
Our packing
Based on Detail products, we use different Standard packing
suitable overseas shipment.
For carbide rod packing as following
1. outsizde carton or plywood case
2. inner packing is plastic box or small carton with cotton or
paper protection
We always persuit long term business with our clients by our good
quality. please do not hesitate to contact us at any time
