End Mills Grade Ground Cemented Tungsten Carbide Rod With High
Hardness
We can supply all kinds of dimensions solid carbide rods with
fine&sub micron grain size .We manufactured and stocked many
dimensions of ground and unground carbide rod for your. We have a
large range of grade for your choice. We also can develop grade
based on your application. Please do not hesitate to contact us.
Production Info.
1. Hardness can reach to HRA 94, TRS ≥4000 N/mm²
2. Various dimension of the rods can be supplied, also can
customized as your requirements.
3. Blank rods and polished rods available
4. The minimum diameter is φd 0.3mm and the tolerance can reach to
±0.001mm.
5. Common diameter from 1mm---35mm
6. Blank Diameter tolerance: +0.3--0.8mm; length tolerance:
+0.3--1.8mm
7. Ground tolerance generally h5/h6, can based on your requirement.
Product features:
1. Using100% virgin raw material guaranteed products quality
2. Our tugnsten carbide rods use dry isostatic pressing machine and
low press sintering technology, which showed uniform distribution
of cobalt magnetic, high hardness and bending strength.
3. Inner structure are more compact and well distributed in
metallographic test.
4. It can reach a mirror effect surface after accurate grinding.
5. customization is avaliable
6. Perfect quality control systerm: ISO9001:2015
Grade information
| Carbide Grade | ZF06C | ZF08C | ZF12C | ZF10CS | ZF10CF | ZF10C |
| WC | % | 94 | 92 | 88 | 90 | 90 | 90 |
| Co | % | 6 | 8 | 12 | 10 | 10 | 10 |
| Grain Size | μm | 0.4 | 0.4 | 0.4 | 0.4 | 0.6 | 0.8 |
| Density | g / c m³ | 14.85 | 14.65 | 14.25 | 14.4 | 14.4 | 14.4 |
| Hardness | HRA | 94 | 93.5 | 92.3 | 93 | 92.5 | 91.5 |
| TRS | N / m m² | 4000 | 4000 | 3800 | 3800 | 3600 | 3600 |
| Grade | Recommendation |
| ZF06C | This tungsten carbide rod is with 0.4μm ultrafine particles and CO
6%. Be suitable for processing aluminum- magnesium alloy, glass
fiber, carbon fiber, wood, hard plastic, etc. Recommend for making
micro tools and drills. |
| ZF08C | This tungsten carbide rod is with 0.4μm ultrafine particles and CO
8%. Be suitable for processing resin, wood, titanium alloy,
stainless steel, copper-aluminum alloy, composite material.
Recommend making high speed drill, end mill, graver and micro-drill
PCB with diameter less than 0.8mm. |
| ZF12C | This tungsten carbide rod is with 0.4μm ultrafine particles and CO
12%. Be suitable for semi-finishing and finishing process of
stainless steel, mold steel and normal titanium alloy, etc.
Recommend for making all types of high speed end mills, reamers and
gravers. |
| ZF10CS | This tungsten carbide rod is with 0 . 4 μ m ultrafine particles and
CO 12 %, higher hardness . Be suitable for finishing process of
stainless steel , mold steel and normal titanium alloy , etc .
Recommend for making all types of high speed end |
| ZF10CF | This tungsten carbide rod is with 0 . 6 μ m Sub - micron particles
and CO 10 %, which is widely used in cutting tools . Be suitable
for rough finishing , semi - finishing and finishing of mold steel
, grey cast iron , austenitic stainless steel and heat - resistant
alloy . Recommend for making normal drill and end mill |
| ZF10C | This tungsten carbide rod is with 0 . 8 μ m Sub - micron particles
and CO 10 %. Be suitable for rough finishing and semi - finishing
of normal steel , cast iron and stainless steel . Recommend for
making normal drill and end mill |
Tungsten Carbide rod We offer:
- pressed and extruded unground, ground and polished rods with or
without chamfers
- rod products that can be ground to h6 tolerances
- carbide rod with one or two parallel holes
- a variety of grades that provide exceptional wear and impact
resistance
- grades for use in end mills, reamers, drills, countersinks,
engraving tools, routers, and other rotary tools
- grades for use in a broad range of applications in almost any
material
- grade for stamping /colding/ forging dies
We make tungsten carbide rods extruded or pressed.
Diameter from 0.3mm to 40mm,
length in 310mm, 330mm or 340mm, or any length.
Grade inYL10.2, K10, K20 K30, K35 or etc.
Production Process:
Power mixing-Pressing-HIP sintering-Blank- Processing- Finished
Common size list
Grinding | Blank |
D | L | D | L |
(mm) | Tol.(mm) | Tol.(+1mm) | (mm) | Tol.(mm) | Tol.(+3mm) |
| 0.7 | h6 | 330 | 1 | +0.2 | 330 |
2 | h6 | 330 | 2.2 | +0.2 | 330 |
3 | h6 | 330 | 2.7 | +0.2 | 330 |
3.175 | h6 | 330 | 3.2 | +0.2 | 330 |
4 | h6 | 330 | 3.7 | +0.2 | 330 |
5 | h6 | 330 | 4.2 | +0.2 | 330 |
6.35 | h6 | 330 | 4.7 | +0.2 | 330 |
7 | h6 | 330 | 5.2 | +0.2 | 330 |
8 | h6 | 330 | 5.7 | +0.2 | 330 |
9 | h6 | 330 | 6.2 | +0.2 | 330 |
10 | h6 | 330 | 6.7 | +0.2 | 330 |
12 | h6 | 330 | 7.7 | +0.3 | 330 |
12.7 | h6 | 330 | 8.2 | +0.3 | 330 |
13 | h6 | 330 | 8.7 | +0.3 | 330 |
14 | h6 | 330 | 9.2 | +0.3 | 330 |
15 | h6 | 330 | 9.7 | +0.3 | 330 |
16 | h6 | 330 | 10.2 | +0.3 | 330 |
17 | h6 | 330 | 10.7 | +0.3 | 330 |
18 | h6 | 330 | 11.2 | +0.3 | 330 |
20 | h6 | 330 | 12.2 | +0.3 | 330 |
| 25 | h6 | 330 | 14.3 | +0.3 | 330 |
| 30 | h6 | 330 | 16.2 | +0.3 | 330 |
For more size information, please kindly email or call us.For
length, we can cut to any size.
Our packing
Based on Detail products, we use different Standard packing
suitable overseas shipment.
For carbide rod packing as following
1. outsizde carton or plywood case
2. inner packing is plastic box or small carton with cotton or
paper protection
We always persuit long term business with our clients by our good
quality. please do not hesitate to contact us at any time
