Titanium Aluminum Alloy Sputtering Targets In Electroplating

Titanium Aluminum Alloy Targets

Titanium-aluminum alloy targets need to meet the requirements of purity, density, grain size, and surface finish. Among them, purity, density and grain size are directly related to the target preparation process.

The ordinary smelting method usually used in the preparation of metal alloys. However, this method is not suitable for the preparation of titanium aluminum alloy, and the main reasons are as follows:

(1) The smelting process of titanium aluminum alloy is easy to form a variety of intermetallic compounds, such as Ti3A1, TiAl, TiAl2, TiAl3, etc. The presence of these intermetallic compounds causes the processing brittleness of titanium aluminum alloy, especially when the aluminum content in the alloy exceeds 50% (Atomic ratio), this problem is particularly obvious;

(2) Titanium-aluminum alloy targets are prepared by smelting process. Bubbles, looseness and segregation are prone to occur during the casting process, resulting in uneven composition and structure in the alloy, resulting in unstable target quality.

According to research reports on the production process of titanium-aluminum alloy targets at home and abroad, the main preparation techniques of titanium-aluminum alloy sputtering targets at present include: high current heating method, hot isostatic pressing sintering method, and hot pressing sintering method.

Titanium Aluminum Alloy Targets Description

Titanium Aluminum Alloy Targets Picture:

Strong current heating method: Using a device that can obtain a large current, the high current is used to heat the titanium powder and aluminum powder, and pressure is applied to cause the aluminum and titanium to react with themselves to form a titanium aluminum alloy target.

Hot isostatic pressing sintering method: This method mixes titanium powder and aluminum powder, and then passes through powder loading, cold isostatic pressing, pre-compression, degassing, and then hot isostatic pressing molding, and finally sintering and processing. Titanium aluminum alloy target.

Hot pressing sintering method: This process makes titanium aluminum powder sintered under the combined action of heat and force, and uses the low melting point of aluminum in the Ti-Al mixture to bond the titanium powder together to form an alloy sputtering target.

Hot press sintering is the most potential preparation technology for titanium aluminum alloy sputtering targets. The technology has high process efficiency and is suitable for industrialized production. However, using this technology to prepare titanium aluminum alloy targets requires repeated trials to select a suitable release agent to improve.

JINXING MATECH is a research and development, production, processing and sales of integrated, comprehensive refractory metal, precious metal material manufacturer.JINXING MATECH is an expert provider on the metal solution. Especially on the products such as Tungsten , Tungsten copper , Titanium , Zirconium, Vanadium, Hafnium, Sputtering Target , Nickel base alloy, Cobalt base alloys etc, products quality supplied according to ASTM , ASME , AMS , MIL , ISO , DIN and EN Standard which mainly used in Semiconductor, Petro-Chemical, Solor , Medical , Aerospace, Military industries.

So far JINXING MATECH's has attracted more than 50 countries customers in We mainly supply to the Market such as Canada, Sweden, Italy, Denmark, India, New Zealand , Mexico, South Korea , Netherland , Australia , India and Southeast Asia coutries sand many other countries and regions by reliable qualities, professional service and cost effective pricing. JINXING MATECH's production and inspection equipments include 100tons Hydraulic press, 20 tons Automation Controls Press, Vacuum Pressure Sintering Furnace , Electro-sparking wire cut machine ,powder metal Mixer, Granulation Drum, Hydrogen Sintering Furnace, Rochwell and Brinell hardness meters ,Metallocope , carbon and oxygen analyser etc.. JINXING MATECH's has 8,000 square meters construction area as well as two workshops ,JINXING MATECH people keep improving products quality and inspect the density, hardness and composition of finished products strictly, which ensures every product meets customers' requirements.

Technology Process

Strong manufacturing capabilities along with a full-scale R&D and test lab give us the ability to fully control all process of raw materials preparing, manufacturing, inspection, packing and delivery.

Our success is built on long-standing customer relationships, the quality of our sputtering targets and the level of technical and logistic services and sensitivity to economic, political and environmental issues. Within our organization, we are continually challenging our own performance.

All of our core technical team members have more than 10 years professional experience of both R&D and high volume manufacturing. Our business operations and logistics team is staffed with experienced professionals to provide friendly and timely support and services to our customers.

Quality Assurance

Special Metals Fabrication is an ISO 9001: 2015 accredited company. Our attitude to quality assurance means we are continually striving to improve our company and to ensure we are working to the highest possible standards.

Quality is a big part of every day at Special Metals Fabrication. Each service we offer has its own team of experts, making sure everything we offer complies within the standards we have set.