Specialized Focused Ultrasonic High-Frequency Nozzles For Balloon
Catheter Spraying
Description:
Specialized Focused Ultrasonic High-Frequency Nozzle are mainly
used for spraying balloon catheters. The atomizing nozzle is made
of military grade TC4 titanium alloy and has good acoustic
characteristics. The liquid supply mode of the nozzle is different
from other nozzles in design. The liquid is introduced to the
atomizing surface through the externally installed conduit, and the
gas enters from the nozzle hole. The air flow attracts the spray to
form an extremely narrow spray beam. The flow rate is generally
about 20-100 μ l/min, and the spray diameter is between 1-2 mm. The
median droplet diameter produced is very small. The significant
feature of this technology is that the liquid feed is external, and
before the liquid is atomized, the liquid is completely isolated
from the nozzle vibration. This means that in different spray
cycles, spray has higher stability and reproducibility.
According to the atomization requirements of different solvents,
FUNSONIC can provide ultrasonic atomization nozzles with different
frequencies such as 60Khz, 100kHz, 120kHz, etc. Meanwhile, by
adding an inlet pipe, it is possible to spray two, three, or even
four or more solutions simultaneously. If you have any questions,
feel free to call FUNSONIC at any time to inquire about product
details.
Parameters:
| Model | FSW-6005-L |
| Name | 60Khz Line Ultrasonic Nozzle Atomization |
| Frequency | 60Khz |
| Atomized particle size range(μm) | 15-40 |
| Spray width(mm) | 0.5-2 |
| Spray flow(ml/min) | 0.01-1 |
| Spray height(mm) | 10-20 |
| Liquid viscosity (cps) | <15 |
| Particle size (μm) | <8 |
| Diversion pressure (Mpa) | <0.02 |
| Application | Suitable for Medical balloon, stent, fine wire spraying |
Advantages:
1. Medical devices: Surface treatment of vascular stents,
catheters, and other implants to improve the compatibility and
antithrombotic properties of biomaterials; Coatings for dental and
surgical instruments.
2. Electronic products: Used as protective coatings for circuit
boards, wires, and connectors to improve insulation and moisture
resistance.
3. Automotive industry: Coating engine components, fuel systems,
and other critical components to improve corrosion resistance and
wear resistance.
4. Aerospace: Apply protective coatings on lightweight and
high-performance materials.
5. Home appliance manufacturing: Used for coating the surface of
home appliances to enhance aesthetics and durability.
6. Textiles: Applied on functional textiles to increase waterproof,
anti fouling and other characteristics.
7. Coatings and paints industry: used for spraying high-performance
coatings to improve coating quality.
Specialized Focused Ultrasonic High-Frequency Nozzles For Balloon
Catheter Spraying
