Sign In | Join Free | My burrillandco.com
Home > Outdoor Sports >

SMC-8018 Averaging Leveling Beam 3HZ Construction Machine Control Systems

    Buy cheap SMC-8018 Averaging Leveling Beam 3HZ Construction Machine Control Systems from wholesalers
     
    Buy cheap SMC-8018 Averaging Leveling Beam 3HZ Construction Machine Control Systems from wholesalers
    • Buy cheap SMC-8018 Averaging Leveling Beam 3HZ Construction Machine Control Systems from wholesalers
    • Buy cheap SMC-8018 Averaging Leveling Beam 3HZ Construction Machine Control Systems from wholesalers
    • Buy cheap SMC-8018 Averaging Leveling Beam 3HZ Construction Machine Control Systems from wholesalers

    SMC-8018 Averaging Leveling Beam 3HZ Construction Machine Control Systems

    Ask Lasest Price
    Brand Name : SIMING
    Model Number : SMC-8018
    Certification : ISO9001/CE
    Supply Ability : 10 psc per month
    Delivery Time : 1-3 days
    • Product Details
    • Company Profile

    SMC-8018 Averaging Leveling Beam 3HZ Construction Machine Control Systems

    SMC-8018 The Ultimate Averaging Leveling Beam for Construction Efficiency


    Description

    The SMC-8018 produced by Jiangsu Siming is a general-purpose construction machine control system. The front section of the unilateral balance beam uses 3 single-probe sensors, and the rear section uses a 6-probe shoe sensor. The shoe sensor can be used for height detection, and its operation is simple and reliable. SMC-8018 is a flexible and efficient control system. Its operating system is based on advanced micro-processing technology and adopts CAN bus technology. It is suitable for all kinds of imported and domestic


    Usage conditions:

    The SMC-8018 produced by Jiangsu Siming is a general-purpose construction machine control system. The front section of the unilateral balance beam uses 3 single-probe sensors, and the rear section uses a 6-probe shoe sensor. The shoe sensor can be used for height detection, and its operation is simple and reliable. SMC-8018 is a flexible and efficient control system. Its operating system is based on advanced micro-processing technology and adopts CAN bus technology. It is suitable for all kinds of imported and domestic brand pavers, and is used for automatic leveling control in the construction of supporting pavers.


    Technical features and advantages:
    1.Highly intelligent, it can automatically identify the limbs of construction workers, tools, pits and wells, etc., and give automatic alarms; when there is a line connection failure or probe failure, the panel LED numbers can prompt alarm displays. For example, some systems are equipped with multiple probes on both sides. If one group of probes fails, it can switch to emergency mode and still work normally to ensure the smooth progress of construction.
    2.The processing technology is fine. The product adopts integral potting, which is moisture-proof and vibration-resistant, and the protection level can reach IP67. The selected components are directly imported from abroad to reduce possible defects in the intermediate links.
    3.The detection range is large, which can improve the continuity of measurement and avoid the occurrence of sudden rises and drops.
    4.It has good adaptability and can work stably and reliably in different construction environments (such as high-temperature environments), temperature conditions and material characteristics.
    5.The system is flexibly configured. The controller is matched with a variety of sensors to meet various construction requirements such as surface layer paving, following seams, and road surface sensing. Some can be seamlessly connected with the original controller of specific vehicle models, simplifying the system connection and operation steps.
    6.It can solve the problem that traditional balance beams cannot pave curves and bridge roads. Some balance beams use independent probes for temperature compensation to further improve the measurement accuracy.


    Multi point introduction:

    Technical Parameters:

    Working voltage: 10V~30V

    Communication type: CANbus

    Controller output current: 5A

    Controller output type: NPN, PNP

    Output frequency: 3HZ

    Ultrasonic detection range: 25cm~100cm

    Resolution: 0.2mm

    Ultrasonic probe frequency: 200KHZ

    Working temperature: -20~85℃

    Product configuration:

    serial numbernameunitquantityRemark
    18008 master controllerOnly2
    28008 sensorOnly6
    38428 sensorOnly2
    48008 junction boxOnly2
    58008 sensor temperature compensation rodindivual6
    68008 power cordroot22m spiral wire black
    78008 junction box wireroot22m helix yellow
    88008 sensor lineroot8Black spiral wire 2 meters 4, 1.3 meters 2
    9handleOnly8
    10Main controller mounting plateindivual2M10×150 screws, 2 pieces (including flat spring washer nuts)
    M4×6 inner hexagon, 8 pieces
    M4×15 inner hexagon, 4 pieces
    11Junction Box Activity Cardindivual2M10×150 screws, 2 pieces (including flat spring washer nuts)
    M4×6 inner hexagon, 8 pieces
    12hanging rod activity cardOnly8M10×150 screws, 8 pieces (including flat spring washer nuts)
    13Locating ringOnly12Contains 16 pieces of M10×25 screws
    14U-shaped sensor mounting cardset6M8 stainless steel wing nuts, 16 pcs, M8 anti-loosening nuts, 16 pcs
    15Card beam deviceOnly4M10×90 screws and nuts, 4 pieces (including flat elastic pads)
    16hanging rodroot8
    17Aluminum alloy beam/stainless steel beamBag4M10×35 screws, 16 pieces (including spring washers);
    M10×50 screws, 8 pieces (including flat spring washers)
    18Stainless Steel Inner BracketBag2M10×40 screws, 8 pieces (including nuts)
    19Stainless steel outer bracketBag2M10×40 screws, 16 pieces (including nuts)
    20Bracket connection round piperoot4
    21stuckOnly8M12×75 screws, 16 pieces (including flat elastic pads)
    22Standard PartsBag1
    23cable tieroot20
    24active splintConfigure according to customer needs
    25welding plateConfigure according to customer needs
    26toolset1Including utility knife, 1 17-19 solid wrench, 1 16-18 solid wrench, 1 16-18 torx wrench, 1 17-19 torx wrench, 1 12-inch adjustable wrench
    27materialshare1Including 1 instruction manual, 2 labels, 1 identification certificate, 1 shipping list, and 1 user opinion survey form

    Construction case:


    Quality SMC-8018 Averaging Leveling Beam 3HZ Construction Machine Control Systems for sale
    • Haven't found right suppliers
    • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
    • And this service is free of charge.
    • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
    Submit Buying Request
    Send your message to this supplier
    *From:
    Your email address is incorrect!
    *Subject:
    Your subject must be between 10-255 characters!
    *Message:
    For the best results, we recommend including the following details:
    • --Self introduction
    • --Required specifications
    • --Inquire about price/MOQ
    Your message must be between 20-3,000
    Yes! I would like your verified suppliers matching service!
    Send your message to this supplier
     
    *From:
    *To: Jiangsu Siming Engineering Machinery Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Explore more Averaging Leveling Beam products from this supplier
    Find Similar Products By Category:
    Inquiry Cart 0