Momentive RTV60 Potting Encapsulating High-Temp Silicone Elastomer
Basic Properties
| Property | Value |
|---|
| Uncured State |
|
| Color | Red |
| Viscosity | 47,000 cps |
| Specific Gravity | 1.48 |
| Work Time (0.5% DBT) | 2 hrs @ 25°C |
| Cure Time (0.5% DBT) | 24 hrs @ 25°C |
| Cured State |
|
| Hardness (Shore A) | 57 |
| Tensile Strength | 70 kg/cm² (990 psi) |
| Elongation | 120% |
| Tear Strength | 7 kg/cm (40 lb/in) |
| Volume Resistivity | 4.4×10¹⁴ ohm·cm |
| Thermal Range | -54°C to 260°C continuously |
Product Introduction
Momentive RTV60 is a two-component high-temperature silicone rubber
composed of a base compound and DBT (dibutyltin dilaurate) curing
agent. With a unique medium viscosity (47,000 cps) balancing
flowability and anti-sag properties, it cures completely at room
temperature within 24 hours without heating equipment. Solvent-free
and odorless, it forms a resilient elastomer maintaining mechanical
integrity across extreme temperatures (-54°C to 260°C).
Advanced Technical Properties
RTV60 delivers exceptional mechanical and electrical stability post-cure:
- 57 Shore A hardness provides optimal flexibility without brittleness
- 990 psi tensile strength and 40 lb/in tear strength exceed industrial sealing standards
- 4.4×10¹⁴ ohm·cm volume resistivity guarantees high-voltage insulation reliability
- 0.31 W/m·K thermal conductivity balances insulation and heat dissipation
Cure speed is adjustable via DBT concentration (0.1%-0.5%), while
vacuum degassing eliminates bubbles for defect-free deep-section
curing.
Application Scenarios
RTV60 is widely used in high-temperature and electrical protection
scenarios:
- EV Motor Potting
- Tesla motor controller sealing (Source: Electrek 2022)
- Withstands 260℃ powertrain peaks, compliant with ISO 16750
- Aircraft Engine Gaskets
- Lockheed Martin F-35 APU seals (Source: Aviation Week)
- Resists jet fuel corrosion, meets MIL-R-25988
- 3D Printing Molds
- Stratasys J850 PolyJet tooling (Source: Stratasys Whitepaper)
- Supports metal injection molding <300℃, reusable >50 cycles
FAQ
1. Who are we?
We are Shenzhen Huazhisheng New Material Technology Co., Ltd., a
professional industrial adhesives and sealants supplier based in
China since 2018. we serve global markets: Mainland China (60%),
Southeast Asia (20%), North America (10%), and Europe (10%).
2. What products do you offer?
we supply high-performance adhesives and sealants from global
leaders including:
Cemedine, Dow Corning, Shin-Etsu, Araldite, and Momentive,etc.
3. How do you guarantee product quality?
Quality assurance through:
Mandatory pre-production samples approval
Final inspection by QC team before shipment
International certifications: SGS, UL, FDA, RoHS, REACH
4. Why choose us over other suppliers?
Reliable Supply:Authentic products from top manufacturers
Expert Support:Technical guidance for product selection
Global Compliance:Certifications meeting target market standards
Efficient Service:Customized solutions & professional support
5. What services do you provide?
Delivery:EXW/FOB/CIF
Payment:USD/EUR/CNY/HKD via T/T, L/C
Support:Technical consultation & logistics coordination
..
