Titanium Straight Dentsply Xive Dental Implants Abutment
Dentsply Xive® Titanium Straight Abutment Compatible
3.0mm / NP 3.4mm / RP 3.8mm / WP 4.5mm / 5.5mm
Desciption:
This staight abutment comes with a screw that takes a Hex 1.2mm
driver
This abutment is prep-able with a 1mm/2mm/3mm collar height. (Or according your customize request)
Material:
Ti 6AI-4V ELI (Supply from Germany)
Feature:
* Titanium interface abutment
* 1pc Screw Included
* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility
* Can production Custom interface
Approved by CE, ISO 9001, ISO 13485
| ABUTMENT | A | B | C | D |
| 13.038 | NP | 3,40 | Hex. 2,20 | 2,00 | 4,50 |
| 13.039 | RP | 3,80 | Hex. 2,50 | 2,00 | 4,50 |
| 13.040 | WP | 4,50 | Hex. 2,50 | 2,00 | 4,50 |
| 22.038 | NP | 3,40 | | 2,00 | |
| 22.039 | RP | 3,80 | | 2,00 | |
| 22.040 | WP | 4,50 | | 2,00 | |
| 23.039 | RP | 3,80 | | 2,00 | |
Points of Dentsply Xive Abutment:
Xive® S
Titanium abutments are color coded (3.0 brown, 3.4 gray, 3.8
yellow, 4.5 blue and 5.5mm red) for easy identification in regards
to the platform diameter. Four collar heights (1, 2, 3 and 5mm) in
straight and angled (15 degrees) configurations are offered for
titanium abutments. The angle of the angled abutment is machined in
relation to the flat side of the indexing feature (hex). Each
titanium abutment has a screw hole tapped in to the intended
lingual wall of the abutment for possible horizontal screw fixation
of the definitive restoration.
Xive® TG
Titanium abutments are not color coded and seat on any TG implant
diameter (3.4 gray, 3.8 yellow and 4.5 blue). Machined straight and
angled (15 degrees) with the angle of the angled abutment machined
in relation to the flat side of the indexing feature (square). Each
titanium abutment has a screw hole tapped in to the intended
lingual wall of the abutment for possible horizontal screw fixation
of the definitive restoration.
