RP 4.3mm 3.0mm Nobel Biocare Active Tooth Implant Abutment
Nobel Biocare Active® Impression Coping Transfer Closed/Open Tray
Compatible
3.0mm/ NP 3.5mm/ RP 4.3mm
Material:
Ti 6AI-4V ELI (Supply from Germany)
Feature:
- Titanium interface abutment
- Precision machined up to ± 5µm
- Combination of high fatigue strength
- Superior level of biocompatibility
- Exterior retentions for more cementation bonding
Approved by CE, ISO 9001, ISO 13485
| TRANSFER | A | B |
| 17.044 | NP | 3,00 | Hex 2,25 |
| 17.045 | RP | 3,35 | Hex 2,65 |
Points of Nobel Biocare Active™ Impression Coping Transfer:
Fig. 1
Indirect impression copings designed for the closed tray impression
technique are produced in two emergence profiles for NP platform
implants (Fig.1) and three emergence profiles for RP implants
(Fig.2). NP impression copings are produced in one height of 13mm
while RP impression copings are available in two heights of 13m
(Fig.2, top row)and a low profile version (Fig.2, bottom row) of
9mm.
Emergence profiles for NP impression copings are machined in 3.6
and 5.0mm. RP impression copings are
Fig. 2
offered in three emergence profiles of 3.6, 5.0 and 6.0mm Early
production versions were produced without color coding for
identification but Nobel Biocare™ has started to color code some of
the impression copings. The NP (3.5mm) platform would be
represented through the color fuchsia and RP/WP (4.3/4.9mm)
impression copings will be yellow in color. A Unigrip™ driver may
be used to service the fixation screw for impression copings.
Fig. 3
Direct impression copings designed for the open tray impression
technique are produced in two emergence profiles for NP platform
implants (Fig.3, top row) and three emergence profiles for RP
implants (Fig.3, bottom row). NP impression copings are produced in
one height of 14mm while RP impression copings are available in two
heights, 14m and a low profile version of 10mm. Emergence profiles
for NP impression copings are machined in 3.6 and 5.0mm. RP
impression copings are offered in three emergence profiles of 3.6,
5.0 and 6.0mm Only NP (3.5mm) platform impression copings are color
coded for identification (fuchsia). A Unigrip™ driver may be used
to service the fixation screw for impression copings.
