Zimmer Screw Vent Ti 6AI 4V ELI 1.27mm Hex Implant Abutment
Zimmer Screw-Vent® Titanium Straight Abutment Compatible
NP 3.5mm/ RP 4.5mm/ WP 5.7mm
Desciption:
This staight abutment comes with a screw that takes a .050/1.27mm
hex driver
This abutment is prep-able with a 1mm/2mm/3mm collar height. (Or according your customize request)
Material:
Ti 6AI-4V ELI (Supply from Germany)
Feature:
* Titanium interface abutment
* 1pc Screw Included
* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility
* Can production Custom interface
Approved by CE, ISO 9001, ISO 13485
| STRAIGHT ABUTMENT | A | B | C | D |
| 13.017 | NP | 3,50 | Hex.2,42 | 2,00 | 4,50 |
| 13.018 | RP | 4,50 | Hex.2,42 | 2,00 | 4,90 |
| 13.019 | WP | 5,70 | Hex.3,05 | 2,00 | 5,90 |
Points of Zimmer Tapered Screw-Vent® (TSV), Screw-Vent® Abutment:
Fig. 1
Titanium contoured Hex-Lock® abutments are machined with a sloping collar as straight (Fig.1)
and angled (17°, Fig.2) versions. Both the angle and lowest point
of the slope coincide with a flat side of the indexing feature
(hexagon) of the abutment. None of the abutments are color coded or
otherwise marked for platform diameter identification. Abutment
screws are trapped at will inside the abutment due to engineering
ingenuity and replaceable in case of screw failure.
Fig. 2
Several collar heights are offered for all three implant/abutment
interface platform diameters (3.5, 4.5, 5.7mm). The listed collar
height is measured at the lowest point of the sloping collar. 3.5mm
platform abutments are produced with a 4.5mm emergence profile
diameter and 4.5mm platform abutments are available in two
emergence profiles of 4.5 and 5.5mm while 5.7mm platform abutments
are fabricated with a emergence profile of 6.5mm. Straight
abutments are provided with a choice of three collar heights (1, 2,
3mm) and angled abutments are available in two collar heights of 1
and 2mm. Each abutment is packaged with a final fixation screw to
make a complete kit.
