ISO 13485 Closed Open Tray Dentsply Ankylos Tooth Abutment
Dentsply Ankylos® Impression Coping Transfer Closed/Open Tray
Material:
Ti 6AI-4V ELI (Supply from Germany)
Feature:
- Titanium interface abutment
- Precision machined up to ± 5µm
- Combination of high fatigue strength
- Superior level of biocompatibility
- Exterior retentions for more cementation bonding
Approved by CE, ISO 9001, ISO 13485
| TRANSFER | A | B |
| 17.049 | 4,50 | Cone ANK |
| 17.250 | 4,50 | Cone ANK |
Points of Dentsply Ankylos® C/X Impression Coping Transfer:
Impression copings are designed to work in sequence with previously
placed healing abutments and the planned or already placed
prosthetic abutment type. Two fixture level (implant level) styles
for regular and balance abutments and a abutment level impression
coping for standard abutments comprise the impression coping
selection for Ankylos® C/X implants.
Fig. 1
Standard impression copings are utilized for already placed standard
abutments. The color coded plastic impression copings snap over the
installed abutment while engaging the three grooves machined in to
the long axis of the abutment. A abutment level impression
technique will pick up the impression coping in the impression
material. Four different impression copings are available and
chosen in regards to the abutment height (4mm, 6mm) and abutment
diameter (3.3mm "A", 4.5mm "B").
Fig. 2
Red impression copings (Fig.1, left, catalog # 31045011) are
utilized for "A" type abutments with a 4mm abutment height and
yellow impression copings (Fig.1, right, catalog # 31045021) are
utilized for "A" type abutments with a abutment height of 6mm. Blue
impression copings (Fig.2, left, catalog # 31045031) are utilized
for "B" type abutments with a 4mm abutment height and green
impression copings (Fig.2, right, catalog # 31045041) are utilized
for "B" type abutments with a abutment height of 6mm.
