Popular High Quality 100KW Frozen Meat Microwave Thawing Machine
Equipment introduction:
The microwave thawing method refers to a method of thawing frozen
food under the action of electromagnetic waves of a certain
frequency. Compared with traditional natural thawing, water
immersion or water thawing, it has the advantages of short thawing
time, uniform internal and external heat, reduced meat loss, no
loss of nutrients, clean thawing environment and high product
hygiene standards.
Technology Parameters:
| Machine Name | Microwave Thawing Machine |
| Rated Input power supply | Three Phase,Five lines 380V±10% 50Hz±1% |
| Model | HD-40MD |
| Microwave Output Power | ≥40kW Power can be adjusted |
| Microwave Frequency | 915±25MHZ |
| Dimensions | 8500mm(L)×1200mm(w)×2400mm(H) |
| Height of Feeding | 280mm |
| Width of Conveyer Belt | 600mm |
| Conveyor Speed | 0.5～3.5m/min ( speed can be adjusted) |
| Operating Environment | Relative humidity ≤80% |
| Operating Temperature | 5～40℃ |
| Water supply | Clean water, PH 6.5-8.5 water flow is 10L/min |
| Relative humidity | ≤80% |
| Surrounding | Without corrosive gas, conductive dust and gas explosion |
| Wooden Cases | Export standard fumigation wooden cases |
The characteristics of microwave drying machine:
1. Environmental protection and no pollution;
2, rapid thawing, high efficiency;
3. Not limited by the shape of the thawed object;
4, equipment investment is small, equipment footprint is small,
easy to install.
5. The equipment runs without consumables and the running cost is
low.
Advantages of microwave drying machine:
There is an observation door between box sides and bottom of the
box with hight,it is convenient to clean inner box and observe
condition of material heating. With the door automatic power-off
protection device and it can prevent microwave leak. At the bottom
of the box body rushed into the wind hole, you can use water to
wash box. Enclosure with drag roller ensure the normal operation of
conveyor belt in the casing. At the top of the platoon is wet hole
and have wet wind cover and flange. Top of heating box is power
supply. Equipped with hot air cover and flange, Side plate in the
blinds. Microwave generator set on the heater, The layout of the
electronic devices and circuit specification. It is easy to
maintenance and electric heat dissipation
Service
1. Delivery Term: FOB Qingdao, by vessel
2. Delivery Time: 45 working days
3. Payment Terms: T/T (30% to pay by T/T as down payment , the rest
70% is paid by T/T before delivery.)
4. Installation / Operation / Service / Manual: In English
5. Installation team: Commissioning service provided for 4-17 days.
The client bears the technician’s round-trip flight tickets,
accommodations and daily salary of USD 80.
6. Warranty: One year from the date of completion of the
commissioning
7. Pre-shipment Inspection: Supplier should trial run whole line at
supplier’s factory before shipment.
